incorrect. when you have the sync/sony system and the tweeters are in the pillars, only a midbass signal gets sent to the doors. the highs get sent to the pillars. this would make you tweeters in your new speakes useless. but since you dont have tweeters in the pillars, then you dont need to worry about it. also, those adapters will not fit the tweeter connections.
Well I must have a special truck cause I installed aftermarket speakers with tweeters in my doors and the tweeters in them work just find.
I have the Sync Sony 700watt systems.
Silver 2013 F-150 Supercrew 5.0L FX2
Boss Coilover Suspension-Nitto Terra Grapplers-Airaid Jr Intake-Banks Monster Muffler-MagHytec Rearend Cover, AMP Steps-SCT Tuned By Torrie @ Unleashed Tuning
when you have the sync/sony system and the tweeters are in the pillars, only a midbass signal gets sent to the doors. the highs get sent to the pillars. this would make you tweeters in your new speakes useless..
Originally Posted by Rnlcomp
Apparently you didn't comprehend the OP's question, he asked about door speakers NOT pillar speakers.
i believe this has value in his original question. what good is a tweeter in the door if its only getting a low signal?
The Following User Says Thank You to TheCarStereoCompany For This Useful Post:
Weird...I have a '14 w/ Sync and A pillar tweeters. I used the harness referenced here (Metra) and added Pioneer two way speakers and my highs/tweets sound just fine. As I recall, the tweeters in the pillars get a full signal, but have capacitors on them to limit the lower freqs. (don't quote me on that)