Rear Box seating/ Best setup for two 10"s.
03-20-2009, 01:40 PM
#21
The Cold Shoulder
Thread Starter
Join Date: Mar 2009
Location: CC, Texas
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
That'sexactly what happened to me, i figure an inch would be good, it won't **** up the seats or anthing right? And what about people sitting on the seats while the box is in and it has speakers, won't it do something over time?
03-20-2009, 02:03 PM
#23
The Cold Shoulder
Thread Starter
Join Date: Mar 2009
Location: CC, Texas
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
The space between the hump and the box.
Closer angle.
How it looks, more or less.
Birds eye view on driver side.
Birds eye view passenger side.
That's basically it, i'll measure the box in a bit my mom is making me clean the garage >:|
Oh and where do you guys keep your jacks and other ****? Shuold i buy a tool box lol jk
ghetto yes... does it work..? YES!
03-20-2009, 02:45 PM
#26
The Cold Shoulder
Thread Starter
Join Date: Mar 2009
Location: CC, Texas
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
And it's like a snug fit right?
As for the measurements ummm. It's 49 inches wide, 5 inches all around where it fits around the thing that separates the seats. From inside the box out it's 5 inches. I doubt those are the measurements you were hoping for lol. But check what i noticed when i was measuring
it kinds goes up at a slope. Could this have anything to do with it? I could always fit it like IguessNot did, that was a good idea.
As for the measurements ummm. It's 49 inches wide, 5 inches all around where it fits around the thing that separates the seats. From inside the box out it's 5 inches. I doubt those are the measurements you were hoping for lol. But check what i noticed when i was measuring
it kinds goes up at a slope. Could this have anything to do with it? I could always fit it like IguessNot did, that was a good idea.