Radio question
#1
Senior Member
Thread Starter
Radio question
I bought the Xovision xo 1762 NAV. I cant figure out how to get a clock to stay on screen. It doesnt say in the manual or the remote. Any help would be appreciated
#2
sounds like you have the (+) wire coming out of your unit hooked up where it only receives power when the key is on. if you ran it to the fuse box, just move it to something like the horn. The remote wire is the one that needs to be hooked up so that when the key is turned on it has power.
there should be wires behind your unit so you don't have to run them to your fuse box. use a multimeter tester with the key off to find your hot lead.
hope this helps.
there should be wires behind your unit so you don't have to run them to your fuse box. use a multimeter tester with the key off to find your hot lead.
hope this helps.