Question on Dual Voice Coil Sub
11-02-2010, 11:17 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Question on Dual Voice Coil Sub
I'm thinking about buying an Alpine SWR-1021D Subwoofer. It has dual 2 Ohm Voice coils. The RMS power range on this sub is 100-300 (150 watts per coil). My Amp bridged will put out 250 RMS at 4 ohms only. Now,I know I can wire the sub to show a 4 Ohm load but when I do this how many watts RMS will each voice coil get....I pretty sure the amp is only going to put out 250 but is that going to be shared at 125 to each coil or will it be 250 to each one? If its the later I may not want to use this sub.
By the way I will be wiring the voice coils in series to get the 4 Ohm load.
By the way I will be wiring the voice coils in series to get the 4 Ohm load.
Last edited by wildturkey_hunter; 11-02-2010 at 11:26 PM. Reason: Adding sentence.
