xltsteve

I noticed the Pac Adapter has the rca audio outputs to the amp.Do I still have to tap into the stock speaker wires for the amp output?

GATORB8

Yes (or run new speaker wire), BTW the FRD24 will not work correctly (by itself) with an audiophile system if you've got one.

xltsteve

I have just got the regular 4 door speakers stereo with sync.Will this work?

brocken

You could run new speaker wire to the doors instead of cutting the stock wires.
It's more work but it's a good way to go if you're running lots of power to your speakers.

GATORB8

Sync is added in after the radio, so you may want to tap after the sync module to keep its voice.

Fast895ohstang

there is no way you can "tap" after the apim. its a seperate system from the radio.

GATORB8

Compcoder did it. https://www.f150forum.com/f30/finish...install-48496/

brocken

I'm not sure where the SYNC taps in but I didn't lose it when I ran the PAC oem and new speaker wire to the doors.

mWags

It worked for me too, following instructions from an install post of compCoder's. It was very easy to locate the wires and splice in from there too.

IIRC, I've seen one forum post that said it was dependent on what sound system (basic or other oem) you have installed whether you would loose sync or not.