lachamp

Hey guys. I think I've read every post on here about this harness. I have a 2011 FX4 screw with the 6 disc non sony or nav head unit. I ran all new speaker wires to the doors, and all new speakers. I have a 4 channel amp for those and another sub amp and sub. I'm want to run it off my stock head unit. I did this using line converters and splicing on my 04 truck. I just installed everything and pluged in the pac and only one channel is working. I can plug that one RCA working plug into any of the 4 RCA plugs on my amp and it will play that speaker. So I know the amp and speakers are working right.
Anyone hear of this or know what else I can check. I've seen here where many people have no problems with their 2011's and it's just plug and play. Maybe a bad PAC unit? I'm at a stand still with no sound.
Thanks

Wyo11Scab

iTrader: (1)

I would call PAC. They did a great job answering my questions on a FRD-1

lachamp

I did, they told me to call the play I bought it from. I'm going to pull the dash and see if the wiring is right on their plug before I go through the whole return process. Thanks