ok, how about VIDEO? Need media device for LockPick input
11-02-2015, 02:03 PM
#11
2014 FX4 EcoScrew
Thread Starter
Well, the noise level on the Micca sucks. I must have run my RCA near a power source because I'm getting a lot of buzz on the RCA input. I'm not looking forward to ripping it all out and trying again. It's all contained in the center console, I just ran the RCA's from the jacks in the center console out the bottom and over by my knee so the IR sensor is easy to hit (only downside I've found to the Micca).
12-07-2015, 12:12 PM
#12
2014 FX4 EcoScrew
Thread Starter
UPDATE:
It turns out the noise was from a cheap USB to 3.5mm barrel jack adapter I was trying to use so I didn't have to plug the Micca into the 110 plug in the back on the console.
I switched back to the 110v adapter and the noise is gone. Everything sounds great again.
The only issue I have is the menu's on the Micca are really small on the small screen so they're a bit hard to read. Otherwise I'm happy with it.
It turns out the noise was from a cheap USB to 3.5mm barrel jack adapter I was trying to use so I didn't have to plug the Micca into the 110 plug in the back on the console.
I switched back to the 110v adapter and the noise is gone. Everything sounds great again.
The only issue I have is the menu's on the Micca are really small on the small screen so they're a bit hard to read. Otherwise I'm happy with it.