Ok got a question and looking for suggestions.
#1
Audio Junkie
Thread Starter
Join Date: Nov 2010
Location: Oklahoma
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Ok got a question and looking for suggestions.
This is my truck and its kickpanels. as you can see i cant use my emergency brake. anyone got any cool ideas to work around this speaker? Thanks any ideas just throw them out there just looking for something that will look good and work.
#2
Senior Member
If you can weld, I would cut it and change the angle 90 degrees.(If looking at the pedal and it currently being 6 o'clock to become 3 o'clock) Make sure to gusset the joint or use some angle iron to reinforce the weld. Primer and paint it black. Should last forever if you can do a proper weld. IF not you could go to a local fab shob and they should do it for about $50 if that.