New Maestro and DNX890HD
#382
One Clean Machine
iTrader: (5)
It is if you use this: http://maestro.idatalink.com/accesso...product_id/393
Available at Crutchfield.
Available at Crutchfield.
#383
One Clean Machine
iTrader: (5)
Cant wait, I have the Kenwood DNX892 and the the oem style backup cam with rca termination ordered! Hope to install everything this coming weekend
#384
One Clean Machine
iTrader: (5)
Curious, did any of you guys mount your gps antenna directly under the dash, to keep it out of site?
#385
Senior Member
I did not. I just cut a small notch in the plastic center dash tray and put it on top next to the sun sensor. I remember reading that some had success putting it just under the dash.
The following users liked this post:
Toddman38 (08-03-2015)
#386
One Clean Machine
iTrader: (5)
#387
One Clean Machine
iTrader: (5)
Does crutchfield include instructions on how to add a backup cam to the HU, when you previously didnt have one? I ordered the oem style ford logo backup cam from The Camera Source with a rca connector.
Any one add this style backup cam... Just trying to have my ducks in a row, when everything arrives and I install it.
https://camera-source.com/automotive...display-s.html
Any one add this style backup cam... Just trying to have my ducks in a row, when everything arrives and I install it.
https://camera-source.com/automotive...display-s.html
Last edited by Toddman38; 08-03-2015 at 02:30 AM.
#388
F150 Greenhorn
Does crutchfield include instructions on how to add a backup cam to the HU, when you previously didnt have one? I ordered the oem style ford logo backup cam from The Camera Source with a rca connector.
Any one add this style backup cam... Just trying to have my ducks in a row, when everything arrives and I install it.
https://camera-source.com/automotive...display-s.html
Any one add this style backup cam... Just trying to have my ducks in a row, when everything arrives and I install it.
https://camera-source.com/automotive...display-s.html
The following users liked this post:
Toddman38 (08-03-2015)
#389
Senior Member
AFAIK all cameras use a coaxial composite video signal/cable that terminates in an RCA type plug. The color of the insulation on the connector is yellow. The Kenwood head unit has a female yellow connector on it. I just tapped the existing composite video line in my truck for the factory rear camera. Then I bought a Kenwood camera for the front.
#390
One Clean Machine
iTrader: (5)
Im assuming the camera has just the yellow rca, a positive, and negative wire?