joefox

I have had the dual 10 full width box available for a while but many of you want a single sub box that will allow you to mount your amps under the rear seat too.
These are available on my website and will start shipping early next week.
The new boxes are for 1-10" vented and 1-12" sealed. The airspace is 1.2 cubic feet and the vented box is tuned @ 35hz. As you can see in the pictures they are well built and feature sturdy internal bracing. The mounting depth is 6.25" with a 6 " diameter magnet and the baffle to floor clearance is 1.75"
The enclosure is 41" wide and you will have a space about 14-15" wide on the passenger side to mount your amps or store whatever you want.
I'll update the thread in a few days with pics of the finished product.

brocken

Awesome! Can't wait to get mine.

compCoder

I am going to be ordering one of these for my truck as well hopefully. I will post here just incase he responds and helps others. I see the dimensions you state for speaker fitment, however, my sub is 5.5" deep so thats good, but the motor is 6.5", will the box allow it to fit with the larger motor and less depth?

Thanks, its about time I get my sub installed, I have been lagging on it, slacking on building my own :P

joefox

That sub will fit with no problems.

Tampawright

oh ya! 10" box for me please what are the covering options? need black to match the interior

compCoder

Just sent my order in, can't wait to get it. Will be filling it with the dc sound lab level 2. Will put up a review of the both the box and the sub w/ the box once I get it setup.

Thanks for all the assistance and prompt replies joefox!!

Tampawright

fox any updates? what type ov coverings are you offering?

joefox

I'm just running a few days behind on this first batch. The boxes are finished but the molded caps for the top and sides are being held up.
I am running some parts on my molding machine for BP that were suppose to take 3 days "6000 parts" but they tripled the order at the last minute and that pushed everything back about a week.
The first batch are charcoal. I meant to have my guys carpet some black but I was out of the shop the day they carpeted the boxes and when I came in the next day all three pallets were done in charcoal. If you want black you can get a can of black spray vinyl dye from your auto parts store and it only takes a few minutes to spray it black.

cwf150

What speaker is recommended for the 12 inch sub box?

joefox

Its a sealed box so it will work with a wide range of subs. Its also a new box so I haven't listened to any subs yet. Alpine's new SWR-1243D Type R 12 looks like it will fit and if it does it should be one of the better subs to use. I'm going to bring one of these boxes to my local Alpine dealer when they are done to test fit one. The new Type R's are 20% shallower than last years model and they have more X-max.