need power help??
04-20-2011, 02:32 PM
#1
Senior Member
Thread Starter
need power help??
Hey everyone, so I need some help on the stereo install, I put a indash nav unit in my truck and I cannot find power that turns on with the key. The harness I bought did not match up with the factory. I have constant power but I cannot find like the remote power that turns on with the key. I found one that turns on with two clicks forward with the key but cannot find one that does it in the acc mode or one click like factory. So when I turn off the truck everything goes dead even before I open the door. Any tips or ideas. I have a tester light and I have tried every wire in sight! 2011 screw EB is the truck thanks all!
04-20-2011, 05:30 PM
#2
Member
Join Date: Sep 2010
Location: Ottawa
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Just pop a “fuse tap” into #41 (Auto dimming rear view mirror, Door lock switch illumination, Radio accessory delay)
I believe all but the bottom end HU use CAN Bus for remote.
Fuse tap example - http://www.tsisecuritycorp.com/TSI_U...s_ATO_ATC.html
I believe all but the bottom end HU use CAN Bus for remote.
Fuse tap example - http://www.tsisecuritycorp.com/TSI_U...s_ATO_ATC.html
04-20-2011, 06:29 PM
#3
Senior Member
Thread Starter
Originally Posted by Lidy
Just pop a “fuse tap” into #41 (Auto dimming rear view mirror, Door lock switch illumination, Radio accessory delay)
I believe all but the bottom end HU use CAN Bus for remote.
Fuse tap example - http://www.tsisecuritycorp.com/TSI_U...s_ATO_ATC.html
I believe all but the bottom end HU use CAN Bus for remote.
Fuse tap example - http://www.tsisecuritycorp.com/TSI_U...s_ATO_ATC.html