need help with factory sub wiring harness
#1
Member
Thread Starter
need help with factory sub wiring harness
I have a '06 screw, and put in a shaker 500 and was going to buy a factory sub for it since i have the harness under the rear seat. but when i put the HU in, i couldn't find the harness for the stereo. I believe i dont have the harness from the kick panel to the HU, just back to under the seat. anyone have the harness from the kick panel to stereo, or know where i can get one. Ford says they only know of the whole entire wiring harness for about $800...yikes! There has to be a way to make this work right?
#2
Junior Member
Join Date: Dec 2009
Location: Phoenix AZ
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
i have a harness I made for my 07 fx2. I have since traded that in on my new 09 fx4. It is the complete harness from the sub to the head unit. Let me know if you are interested. 623-687-4327. bgarness1@***.net
#4
Senior Member
You'll probably need to make your own. The sub wiring goes through the huge C238 kick panel connector along with 60 other circuits. Some audio sites sell the connectors that go into the back of the head unit, you can get that end of the sub connector from there.