raduque

I've finally got together everything I need to install an amp in my FX2. Except that I'm not sure if I have enough power wire.

In my old truck, I had the amp power wire coming off the battery, running across the back side of the engine bay, through a grommet above the pedals, behind the kick panel , underneath the trim where the main wiring loom runs, and then behind the rear seats. My old truck was a Super Cab.

The wire is about 14 feet, including the foot or so for the fused block off the battery, give or take a few inches. Is this enough to go behind the rear seats of my Super Crew? I also have another ~3ft of 8 gauge that I can use with a dist block.

Thanks!

Toddman38

iTrader: (5)

Should be plenty, go through the p.s. grommet...

raduque

By P.S. grommet, you mean the big one on the passenger side?

Feathermerchant

Yes the passenger side. At least on my 2011.

Wyo11Scab

iTrader: (1)

PS on my 2014 also. Think it is a standard place.

Toddman38

iTrader: (5)

Yes.

raduque

I didnt use the firewall grommet. Instead, i went under the cab and through the small grommet under the passenger side sill plate.