How to fire factory sub to aftermarket a hi
#1
Member
Thread Starter
How to fire factory sub to aftermarket a hi
Any guides on how to wire the factory sub to my head unit? It's a Pioneer x5500 I've been searching an cant find anything. O and my truck is not prewired for the sub. Its a 04 XLT supercrew I already checked
Last edited by Bigl34461; 03-04-2013 at 07:14 PM.
#3
Member
Thread Starter
i have a factory sub just laying around I thought I would try to utilize it. But with aftermarket powered sub might just be the easier route. but if can wire the stock sub to the hu without spending alot of money. I would deal with that for the moment.....kinda on a budget right now
#4
Senior Member
iTrader: (1)
i have a factory sub just laying around I thought I would try to utilize it. But with aftermarket powered sub might just be the easier route. but if can wire the stock sub to the hu without spending alot of money. I would deal with that for the moment.....kinda on a budget right now
#5
http://www.f150online.com/forums/spe...lacment-2.html
Look at post #20 & #21 it's a 2009-10 factory sub there's a wiring diagram on post #27
[IMG][/IMG]
Do you have the wiring harness?
The sub enable is likely 5v (from what I read on this forum) you'll need a 12v to 5v converter.
Is this all you need to know?
Look at post #20 & #21 it's a 2009-10 factory sub there's a wiring diagram on post #27
[IMG][/IMG]
Do you have the wiring harness?
The sub enable is likely 5v (from what I read on this forum) you'll need a 12v to 5v converter.
Is this all you need to know?
#6
Member
Thread Starter
Do you have the wiring harness?
The sub enable is likely 5v (from what I read on this forum) you'll need a 12v to 5v converter.
Is this all you need to know?[/QUOTE]
no my truck came with no harness. So i wanted to know if there is a way to hook this up without the harness. Can a buy a different sub and amp and utilize the stock box? I know its easier just to buy a aftermarket setup. but i believe anything is possible
The sub enable is likely 5v (from what I read on this forum) you'll need a 12v to 5v converter.
Is this all you need to know?[/QUOTE]
no my truck came with no harness. So i wanted to know if there is a way to hook this up without the harness. Can a buy a different sub and amp and utilize the stock box? I know its easier just to buy a aftermarket setup. but i believe anything is possible
Trending Topics
#8
Senior Member
iTrader: (1)
By the time you mess around swapping parts you could buy a Sound Ordinance sub and hook it up.
#9
Member
Thread Starter
#10
Member
Thread Starter
I was looking at the Sound Ordinance. I may go that route if i cant do anything with this sub