HELP!! rear seat removal
#21
Car Audio Junkie
never use smaller than 4 gauge wire, bigger if you can, also sound quality is improved when a power and ground is ran from the front battery to the amps, instead of grounding it to a bolt or something, it has been proven time and time again for all those who dont believe it
#23
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Houston, TX
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
problems, problems problems... ok well i was driving down the road today and my system is still hooked up and it was workin fine and bangin hard. i turned the truck off and went inside for like 10 minutes then went out to the truck and turned it on and my indash turned on but music never came out of my speakers and my subs arent working. i checked every thing. all the fuses are good. the lights on my mono block amp are on and the fan is on but my four channel amp doesnt have lights on it. so im guessing its on but the fuse is good on all the amps. i really dont know what is wrong.
#24
Car Audio Junkie
check grounds, remote wire, fuse in back of deck, factory fuse wire (doubt thats it because amps are powering on) double check everything, then check it again just in case