Help with my setup
#1
Member
Thread Starter
Help with my setup
I'm new to the car audio thing. I tried to get me a system on a ebay/craiglis t budget. I have 4 infinity kappa 682.9cf in all doors, a Pioneer avh x5500bhs HU, My sub will be a JL Audio CP108LG-W3v3. Sony Xplod xm1s to power the sub. A Alpine MRP F240 4ch amp and a Old School 1996 Earthquake 4400TXO 4ch amp. Now... my question is should I use the old school amp or the Alpine. I don't have much info on the earthquake. All i know is that it works. I called Earthquake and got them to email me a spec sheet the guy said it was amazing amp in it's day and still is. And that i picked it up for a steal. Here are the specs....
Mono@ 4ohm 250w x 2 ch
Stereo@ 2ohm 125w x 4 ch
Stereo@ 4ohm 85w x 4 ch
Which one do I go with? And how much power do i need to drive to the Infinity speakers and the sub?
Mono@ 4ohm 250w x 2 ch
Stereo@ 2ohm 125w x 4 ch
Stereo@ 4ohm 85w x 4 ch
Which one do I go with? And how much power do i need to drive to the Infinity speakers and the sub?
#2
Senior Member
Easiest setup is probably the Earthquake on the doors at 85x4 and the Sony on the sub at 290x1.
Another option would be: Alpine bridged on front doors at 100x2, Earthquake on the rear doors at 85x2 and sub at 250x1.
Another option would be: Alpine bridged on front doors at 100x2, Earthquake on the rear doors at 85x2 and sub at 250x1.
The following users liked this post:
Bigl34461 (03-10-2014)