got bored and decided to do some remodeling
06-05-2009, 02:57 PM
#13
Real Trucks Smoke
Thread Starter
Join Date: Dec 2008
Location: lone star
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
i had 2 of them in just over 4 cuft on 1200wrms this box is 4.5cuft and each sub is suggested to be in 1.17cuft so i have them in about the right airspace now at 2400wrms, but i do miss how deep they got in the bigger enclosure if i had the room i would have increased the air space for each sub to 2 cuft each. but they still dig deep to about 20-25 hz.
when they were in my car they were in just over 2 cuft sealed each at 2400 wrms and they got really low and hit alot harder than they do in this truck it was enough to crack the spoiler on my trunk lid and rip the latch that held it closed off i ended up having to weld a 1/4 in steel plate under the entire trunk lid to make it stay sealed because it would move about 3 inches when closed then i put on electric lift cylinders (pop trunk) to raise it and help keep it sealed when closed.
when they were in my car they were in just over 2 cuft sealed each at 2400 wrms and they got really low and hit alot harder than they do in this truck it was enough to crack the spoiler on my trunk lid and rip the latch that held it closed off i ended up having to weld a 1/4 in steel plate under the entire trunk lid to make it stay sealed because it would move about 3 inches when closed then i put on electric lift cylinders (pop trunk) to raise it and help keep it sealed when closed.
