Is this the Ford OEM audio Amp?
#1
I Voted For Bill and Opus
Thread Starter
Is this the Ford OEM audio Amp?
Here are photo's of what I think is the Ford OEM audio amp on my 95 F150.
It is located just above the gas pedal, where I am told it is positioned. If this is the case on one of the photos you can just about see the two plugs that go into the right side of this box. Can any of you tell me which one of the plugs the upper or lower is the output side of this amp.
Some where under the dash must be the control unit for the disconnected alarm system I need to make sure the photo's below are not that control unit.
I have found the spec's for this amp and it put outs 14 watts X 4 which is the same power level per channel as the Pioneer Head Unit.
It is located just above the gas pedal, where I am told it is positioned. If this is the case on one of the photos you can just about see the two plugs that go into the right side of this box. Can any of you tell me which one of the plugs the upper or lower is the output side of this amp.
Some where under the dash must be the control unit for the disconnected alarm system I need to make sure the photo's below are not that control unit.
I have found the spec's for this amp and it put outs 14 watts X 4 which is the same power level per channel as the Pioneer Head Unit.
Last edited by transmaster; 07-09-2008 at 06:09 PM.
#2
I Voted For Bill and Opus
Thread Starter
On the back of this box there is a part number, if I supply this part number can any one ID this box with that? I really need to get a new digital camera this Samsung does not focus close very well, it is supposed to be automatic.
This is one of the reasons why I am going to have to spend the 90 bucks or so for a Ford Factory manual set. You just can't get these kinds of details in a Haynes or other similar manual. I will get it on CD so I can make details in it available here.
This is one of the reasons why I am going to have to spend the 90 bucks or so for a Ford Factory manual set. You just can't get these kinds of details in a Haynes or other similar manual. I will get it on CD so I can make details in it available here.
Last edited by transmaster; 02-25-2008 at 03:36 PM.