Ford Kicker Sub not working
#11
That's what we were thinking, I'm going to call kicker customer support Monday and see what's up, the green led is on the side of the amp under the sub so I doubt you'd be able to see it once it's mounted in the truck.
#12
One Clean Machine
iTrader: (5)
The following users liked this post:
jrjunior (10-18-2015)
#14
I pulled signal from the "two twisted wires white with a magenta stripe and white with a orange stripe" exactly how it said in the instructions. I'll take a picture later today though.
#16
I pulled them from the bottom of the wire harness in the pass kick panel, where should I be pulling from?
#17
One Clean Machine
iTrader: (5)
I tapped mine in the p.s. footwell kick panel, they were a twisted together pair...
#19
One Clean Machine
iTrader: (5)
Yeah, mines been installed for 17 months and worked flawlessly....
The wires I tapped were White w/Purple Stripe, and White w/Orange Stripe...
Then the Brown wire from the Substage wire harness went to White w/Purple, and Green from Substage harness went to White w/Orange. Hope this helps...
The wires I tapped were White w/Purple Stripe, and White w/Orange Stripe...
Then the Brown wire from the Substage wire harness went to White w/Purple, and Green from Substage harness went to White w/Orange. Hope this helps...
#20
Yeah, mines been installed for 17 months and worked flawlessly....
The wires I tapped were White w/Purple Stripe, and White w/Orange Stripe...
Then the Brown wire from the Substage wire harness went to White w/Purple, and Green from Substage harness went to White w/Orange. Hope this helps...
The wires I tapped were White w/Purple Stripe, and White w/Orange Stripe...
Then the Brown wire from the Substage wire harness went to White w/Purple, and Green from Substage harness went to White w/Orange. Hope this helps...