Eclipse Nav install problem
03-06-2010, 01:21 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Eclipse Nav install problem
Hey fellas ! I have a slight problem with my install. I have an 08 fl50 and just put in my eclipse AVN 6620. All went well, except for the problem with the volume control. When I am in park or stationary, the volume is normal(works fine) , but when I drive off, the volume goes up on it's own. I am assuming that this is because I didn't connect the speed pulse wire??? I have heard some people say that it is not needed. Is this wire not being connected causing the problem ??? If so, where is the speed pulse wire in my 08??? My stock radio harness sort of Y's off and plugs into 2 places on the stock radio. Please help as I am lost . Thanks!
03-07-2010, 10:55 AM
#3
Junior Member
Thread Starter
Join Date: Jun 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Badcat... I see the wire that your speaking of. It is in the harness and is connected to my aftermarket wiring harness. The aftermarket harness says that the gry/blk wire is for the right front negative(speakers). Is this the right one??? Thanks for your help !