In Dash 'OEM Fit' GPS Navigation DVD
01-12-2012, 11:24 PM
#132
Junior Member
Join Date: Jan 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi, I too bought a dvd nav for my f150 and am having problems with getting any sound, i have power and video but no speaker sound at all please can someone help me with this problem thank you
01-13-2012, 10:07 AM
#133
Junior Member
Join Date: Mar 2011
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I tried to help you via PM if you would answer the questions instead of answering questions no one asked perhaps you would get more help.
I think it pretty obvious at this stage I tried to help you.
02-20-2012, 03:50 PM
#134
Big Kahuna
Thread Starter
Hello again everyone, I've been away from the forum for a while good to see there is still some interest in these units. Nothing really new to report with mine, just stopping in again, I'll help out when I can.
As you were....
As you were....
05-08-2012, 01:03 AM
#135
Junior Member
Join Date: May 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I recently bought mine from eBay and the only issue with it is the button illumination. The buttons won't light up (no night mode function either) and am wondering if this has to do with the pin issue? I'm not entirely sure what you guys mean by switching the pins but I think I have an idea. Has anyone had issues with no illumination of the buttons?
05-14-2012, 09:55 AM
#136
Junior Member
Join Date: Apr 2011
Location: Florida
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Hello Brody,
I had the same issue on my FSN971 unit. I was able to install a pin in pin slot 23 of the new radio harness from the Ford large plug (old radio harness pin 20 called illumination feed). So basically you are routing the Ford illumination wire to pin 23 of the new radio in order to turn on the units illumination. I have attached the pin outs. Have a look and see if this will work for you as well.
Good Luck.
Kp1
I had the same issue on my FSN971 unit. I was able to install a pin in pin slot 23 of the new radio harness from the Ford large plug (old radio harness pin 20 called illumination feed). So basically you are routing the Ford illumination wire to pin 23 of the new radio in order to turn on the units illumination. I have attached the pin outs. Have a look and see if this will work for you as well.
Good Luck.
Kp1
05-15-2012, 10:50 AM
#137
Junior Member
Join Date: May 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm the pinout diagram in the word document is different than those in the pdf. I'm not sure what to change on the ford plug. I don't have a new harness. I just plug the ford harness into the deck. Pin 3 calls for illumination on the pdf and has been confirmed to be giving power but still no lights.