In Dash DVD Install?
03-07-2009, 11:45 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2008
Location: Denver, co
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
In Dash DVD Install?
Ok, I'm getting an eclipse AVN5435 in dash monitor and I just would like to know how hard is it to install this into my 08 screw? What parts would I need or what work would I need to do to install. I have installed stereos before but I just wanna know what the degree of difficulty is from stereo to in dash monitor
03-07-2009, 11:46 PM
#2
Car Audio Junkie
you need dash install kit, wiring harness, and there is a module on ebay that you will need so you can play movies while driving, a simple grounding out of the breakwire wont work
03-07-2009, 11:50 PM
#3
Junior Member
Thread Starter
Join Date: Sep 2008
Location: Denver, co
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Oh. Ok. So its just like a regular stereo with the harness and such. I have seen the module s to be able to play movies while driving. I just wanted to know if its like installing a regular stereo.
03-09-2009, 12:32 AM
#7
Junior Member
Thread Starter
Join Date: Sep 2008
Location: Denver, co
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
So I went to crutch field to get the kit and now I decided to get the kenwood DNX512 in dash monitor/navigation and got their garmin hard drive navigation system too. Lol. Thanks loganberry. Now if I could just find out how to bypass the brake switch?
Trending Topics
03-09-2009, 01:19 AM
#8
Car Audio Junkie
you dont really need a switch for the kenwood like you do the alpine, with the kenwood you can just ground out the break wire...you can hook it up to a toggle switch if you would like too, just put the parking break wire on one side, and ground out the other
hope that helps
hope that helps
