Which Components fit in Stock Locations?
#1
Senior Member
Thread Starter
Which Components fit in Stock Locations?
Guys/ Gals,
I'm looking at a set of Component speakers, however I need them to fit exactly into the stock location with no cutting.
What are you guys running for components in the Front of these trucks? I have a 14 STX with the stock tweeters in the pillars.
Let me know what you have and if you like them.
Thanks
I'm looking at a set of Component speakers, however I need them to fit exactly into the stock location with no cutting.
What are you guys running for components in the Front of these trucks? I have a 14 STX with the stock tweeters in the pillars.
Let me know what you have and if you like them.
Thanks
#3
Senior Member
iTrader: (1)
Guys/ Gals,
I'm looking at a set of Component speakers, however I need them to fit exactly into the stock location with no cutting.
What are you guys running for components in the Front of these trucks? I have a 14 STX with the stock tweeters in the pillars.
Let me know what you have and if you like them.
Thanks
I'm looking at a set of Component speakers, however I need them to fit exactly into the stock location with no cutting.
What are you guys running for components in the Front of these trucks? I have a 14 STX with the stock tweeters in the pillars.
Let me know what you have and if you like them.
Thanks
#4
#6
Tweeter size
Not sure the thread i read it in but the hole size for the stock tweeter pillar location is .75". However if you own a dremel its not to hard to resize the hole with a sanding wheel.
#7
If you're talking about components with tweeters for the stock A pillar location you will need .75" tweeters. If you mount them flush mount you will need to dremel out the hole a little bit. You can also mount the tweeters behind the factory grills if you make a bracket or use hot glue to hold them in.
The Kicker CSS68's will work as will the JL C5-570's.
Here's a shot of mine:
The Kicker CSS68's will work as will the JL C5-570's.
Here's a shot of mine: