Can someone who knows better review my audio setup before I hit the buy button?
#41
Senior Member
Thread Starter
No problem. I have no idea why the formatting and links on these are doubled up and look strange but its a complete list:
___________________________________
$175 - Dual FoxBox
http://www.foxacoustics.com/ProductD...2D210%2DV%2D09
$121 x 2 - Infinity Kappa 682.9cf pair
$100 x 2- Arc 10v3 (2-ohm, 250w RMS)
http://www.arcaudio.com/product-page...ries/arc10.asp
$310 - Amp P1000x5D (4ch x 125w @ 2-ohm PLUS 1ch x 500w @ 2-ohm RMS)
http://www.ebay.com/sch/i.html?_odkw...000X5&_sacat=0
$25 - PEQ
$20 - Wire kit
$25- Scorsche 4 channel LOC
$30 - 150 ft 12 Gauge Speaker Wire
http://www.ebay.com/itm/150-feet-TRUE-12-Gauge-AWG-Speaker-Wire-Car-Home-Audio-Blue-and-Silver-ft-GA-/281064152069?pt=US_Car_Audio_Power_Speaker_Wire&hash=item4170ba9c05#ht_298wt_892_____
$1260
I tapped into all the wires under the center console. 6-screws and it pulls up very easily. Just sit on the floor in the rear and take your time with everything.
I'm a little embarrassed by this picture because I later came back and cleaned all these wires up. They were zip tied up here for all my testing and I didn't think to grab a pic when it was all cleaned up. The power and ground don't really twine together like this photo shows but I figured it at least shows where I put everything. It's behind the driver's side, back seat. The ***** for the dials can all be accessed under the seat with it in the up position ... so really there's no need to get back here to tune. Its screwed into the rear wall.
I also came back and wiped down the box and used a couple bungees to put some pressure that holds it against the back wall nice and clean so the box doesn't stick out quite as much. It also prevents it from sliding around.
___________________________________
$175 - Dual FoxBox
http://www.foxacoustics.com/ProductD...2D210%2DV%2D09
$121 x 2 - Infinity Kappa 682.9cf pair
$100 x 2- Arc 10v3 (2-ohm, 250w RMS)
http://www.arcaudio.com/product-page...ries/arc10.asp
$310 - Amp P1000x5D (4ch x 125w @ 2-ohm PLUS 1ch x 500w @ 2-ohm RMS)
http://www.ebay.com/sch/i.html?_odkw...000X5&_sacat=0
$25 - PEQ
$20 - Wire kit
Amazon.com: Pyle PLAM40 20 Feet 4 Gauge 1600 Watt Amplifier Hookup For Battery Head Unit and Speakers Installation Kit: Car Electronics
$25- Scorsche 4 channel LOC
$30 - 150 ft 12 Gauge Speaker Wire
http://www.ebay.com/itm/150-feet-TRUE-12-Gauge-AWG-Speaker-Wire-Car-Home-Audio-Blue-and-Silver-ft-GA-/281064152069?pt=US_Car_Audio_Power_Speaker_Wire&hash=item4170ba9c05#ht_298wt_892_____
$1260
I tapped into all the wires under the center console. 6-screws and it pulls up very easily. Just sit on the floor in the rear and take your time with everything.
I'm a little embarrassed by this picture because I later came back and cleaned all these wires up. They were zip tied up here for all my testing and I didn't think to grab a pic when it was all cleaned up. The power and ground don't really twine together like this photo shows but I figured it at least shows where I put everything. It's behind the driver's side, back seat. The ***** for the dials can all be accessed under the seat with it in the up position ... so really there's no need to get back here to tune. Its screwed into the rear wall.
I also came back and wiped down the box and used a couple bungees to put some pressure that holds it against the back wall nice and clean so the box doesn't stick out quite as much. It also prevents it from sliding around.