Avh-p4400bt
10-23-2012, 12:43 PM
#11
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Pittsburgh, PA/ Watertown, Ny
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
This it it installed I ended up using plasti dip. I might go with 3m carbon fiber. But for now this works.
Any ideas on what is causing the check engine light to be on?
Any ideas on what is causing the check engine light to be on?
10-23-2012, 05:19 PM
#13
So I got it all hooked up and everything with the h/u works great but now I have no dash lights... Any idea what I screwed up?
It blew the fuse... Did I wire it wrong? Or do I need a fuse bigger than 10 amps for the head unit?
Ok ever thing is working fine except now my check engine light is on... Wft. It's 2am though and I'm going to get some sleep.
It blew the fuse... Did I wire it wrong? Or do I need a fuse bigger than 10 amps for the head unit?
Ok ever thing is working fine except now my check engine light is on... Wft. It's 2am though and I'm going to get some sleep.
10-23-2012, 06:21 PM
#14
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Pittsburgh, PA/ Watertown, Ny
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Check engine light went out on its own and the fuse hasn't blown again. Everything is working fine... The only thing I could think of is I have a relay to bypass the parking brake. It may have grounded it self out so I insulated all the terminals on it... We'll see what happens
10-23-2012, 07:33 PM
#15
Senior Member
When you installed it, did you disconnect the battery prior to install?
This could cause some of the symptoms you are having.
This could cause some of the symptoms you are having.
10-30-2012, 09:59 PM
#18
Member
Join Date: Dec 2009
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Im about to install this : http://www.pioneerelectronics.com/PU...rs/AVH-P3400BH with the harness told in the first post... was it hard? im good at mechanic but not so much about electrical stuff.. i guess the worst that can happen is that i blow a fuse is its plug wrong! I looked at all the wire and it look pretty straight forward!!
10-31-2012, 11:09 AM
#19
Im about to install this : http://www.pioneerelectronics.com/PU...rs/AVH-P3400BH with the harness told in the first post... was it hard? im good at mechanic but not so much about electrical stuff.. i guess the worst that can happen is that i blow a fuse is its plug wrong! I looked at all the wire and it look pretty straight forward!!