Stenz

After seeing how some people mounted their amps I decided that I wanted mine on the back of the cab. I saw a few guys take the entire pad off the back wall but I wanted to keep the sound deadening quality of it.

So I just cut out a square of the padding so I could mount my amp directly to the back of the cab. I used self tapping screws on the raised part of the cab.

My seat folds up fine will plently of room to spare. I know alot of guys mount theirs to a piece of OSB or what not but I didnt think it was necessary.


By sten4413 at 2012-04-04

picaflor

the message is clear... lets cut that padding. thank you

Wyo11Scab

iTrader: (1)

Duct tape the vent behind it

nyterydrtuckn26ss

Yeah not smart place putting amp by the cab vent. Close the vent off or your amp be ruined

Stenz

I didnt even think about that vent... I'll cover it up and that should solve that issue.

Thanks for pointing that out.

techrep

iTrader: (1)

Close the vent off and the cab will be ruined

nyterydrtuckn26ss

Why. Is closing the vent off going to ruin the cab. When I ported my cab n bed I did away with the vent. So I'd like kno how it ruins the cab ??

techrep

iTrader: (1)

The vent is there for a reason...it helps remove condensation from the cab

nyterydrtuckn26ss

Guess I'm ok then Since my cab. Is ported

Wyo11Scab

iTrader: (1)

There should be a vent on the other side also. Blocking one won't hurt.