Alpine type R 6x8 coaxial fit?
#1
Alpine type R 6x8 coaxial fit?
Looking to replace my factory speakers..I looked up online for my 2012 6x8 should fit front and rear? I've also looked into kennwood performance series and kicker..which is the better option ?
#7
Ernie - do you plan to amp the speakers? Also are you coming from the stock HU (non-Sony)? I'm trying to do the same and just getting ideas.
For the poster that went with infinity kappas in all 4 doors, did you amp? Stock HU?
I'm looking to keep stock HU and replace 4 speakers and add amp for them. I do not have tweeter pillars, but am wanting to go components up front at least so will find a mounting place for them.
For the poster that went with infinity kappas in all 4 doors, did you amp? Stock HU?
I'm looking to keep stock HU and replace 4 speakers and add amp for them. I do not have tweeter pillars, but am wanting to go components up front at least so will find a mounting place for them.
Trending Topics
#8
Senior Member
For my '13, I have 6.5" Reference components for the front, 6x8 reference coax for the back, and a JL 360/4 amp to run them. I also have a Reference 1060W 10" sub with a JL 360/2 and an external electronic cross over, just because I've never had an amp that the built in cross over was sufficient to my ear. All I need now is wiring, a box for the sub, and to get back on land to install it. I'm currently sitting on a boat about 255 miles southeast of Houston in the Gulf, waiting on the weather to calm down and the wind to change direction, so we can do our final pull in to the TLP, then I'm headed home. Unfortunately, wind direction is not supposed to change till Thursday.
#9
Brian. My system has not yet been installed as I am still waiting for pieces to show up but this is what it will be.
6.5 kappa components front and back
Kappa four 4 channel amp(this will give each speaker 150 rms)
Kicker crt 12 2ohm X 2
Kicker kx.1600 each speaker will get 800rms
HU will be the Kenwood excelon 890
Sxreens are the only radios that look good in the 09+ trucks Imo
Optima yellow top
250 amp alt upgrade
Big three upgrade to 0 gauge wire
0 gauge from the batter to the firewall where I will run a distribution to 4gauge to the amps.
6.5 kappa components front and back
Kappa four 4 channel amp(this will give each speaker 150 rms)
Kicker crt 12 2ohm X 2
Kicker kx.1600 each speaker will get 800rms
HU will be the Kenwood excelon 890
Sxreens are the only radios that look good in the 09+ trucks Imo
Optima yellow top
250 amp alt upgrade
Big three upgrade to 0 gauge wire
0 gauge from the batter to the firewall where I will run a distribution to 4gauge to the amps.