After Install No Sound from Front Speakers
08-31-2013, 12:13 PM
#1
After Install No Sound from Front Speakers
I'm installing a Pioneer AVH-X3500BHS in my 20006 F 150 and when installed the front and rear speakers don't play only the subwoofers, installed backup camera it comes on and works, when I reinstall factory radio again the front speakers play again, just wont play with new radio, everything seems to be wired right, seem like at least one speaker would play, using a Scosche FD23B connector adapter. Any help or ideas would be appreciated
08-31-2013, 03:42 PM
#3
I'm installing a Pioneer AVH-X3500BHS in my 20006 F 150 and when installed the front and rear speakers don't play only the subwoofers, installed backup camera it comes on and works, when I reinstall factory radio again the front speakers play again, just wont play with new radio, everything seems to be wired right, seem like at least one speaker would play, using a Scosche FD23B connector adapter. Any help or ideas would be appreciated
08-31-2013, 10:48 PM
#5
Things to consider:
1. Everything wired correctly, but you have the LP xover activated on the pioneer(if that model has the feature)
2. Bent pins in the wire harness adapter, bend back pins.
3. Defective radio outputs, put a good speaker on it to test.
could always be something else, but goodluck with the troubleshooting.
1. Everything wired correctly, but you have the LP xover activated on the pioneer(if that model has the feature)
2. Bent pins in the wire harness adapter, bend back pins.
3. Defective radio outputs, put a good speaker on it to test.
could always be something else, but goodluck with the troubleshooting.
09-03-2013, 11:17 AM
#6
Things to consider:
1. Everything wired correctly, but you have the LP xover activated on the pioneer(if that model has the feature)
2. Bent pins in the wire harness adapter, bend back pins.
3. Defective radio outputs, put a good speaker on it to test.
could always be something else, but goodluck with the troubleshooting.
1. Everything wired correctly, but you have the LP xover activated on the pioneer(if that model has the feature)
2. Bent pins in the wire harness adapter, bend back pins.
3. Defective radio outputs, put a good speaker on it to test.
could always be something else, but goodluck with the troubleshooting.
The other 2 are good suggestions.
Are you using the factory sub?
Trending Topics
09-03-2013, 06:24 PM
#9
Just found out from Scosche the company that makes the wire harness that the company I purchased radio from sent me wrong wire harness, I need one with aftermarket amp harness plug in