Tallyman89

I have searched but can't seem to find the answer. 2014 Sony/NAV. Added polyfil to the sub. It seems to help a bit but was wondering about adding a powered sub to the Sony sub. I have a powered sub from a previous truck I was thinking of using. Can I tap off of the Sony sub wires or is it best to tap the rear speaker wires? If tapping the Sony sub, what wires/colors to use?

Wyo11Scab

iTrader: (1)

You can tap either place for a signal. There is a schematic somewhere on this forum

Tallyman89

Found the schematic for the door speakers but no luck on the sub schematic.

ABBYSDAD

I have a 2014 FX2 with the Nav and Sony. I replaced the factory sub with a double ended Bazooka sub. It has a built in 2 channel class D amp with dual 8 inch subs which I replaced with Rockford Fosgate subs. I can't remember the model number as I have had these for over 10 years. The colors are as follows;
Grey +
Grey with stripe -

Green +
Green with stripe -

Hope this helps

Tallyman89

I found the info and installed the sub. Works great. Thanks for the response.