CHUMCHAL72

I have a 04 super crew with the jump seat. I hve 2 10's under the backseat but I still want more bump. So I decided to make a center console sub box. So is took out the cushion part of the middle seat so that there's that middle metal bracket piece there. So I got a bunch measurements and design a box on paper and this is what I got so far.

muddyF-150

what kind of sub are you planning on running? Did you take into account for the airspace needed? if you have the fold down rear seat you can always pick up one of these. http://www.cartoys.com/products/prod...000W-Subwoofer I didn't see the jlaudio one on the website but they have a 12" sub in the same type of box enclosure. hope that helps.

CHUMCHAL72

Yea I took airspace onto account and I used an airspace calculator it came out to 1.145 cubic feet and the Kenwood sub KFC W12PS needs 1.25 so I think ill be allright there.

CHUMCHAL72

Decided to mock up one side of the box to make sure that piece would fit.



It fit in there with just one problem problem.




Just down at the bottom right next to where your feet go it was a little high so that it wouldn't sit on the carpet I'm goin to add an inch so it will sit in there good



Here's my drawing with what I'm doin to the box.

CHUMCHAL72

Bad last pic here's a better one

CHUMCHAL72

What I have done so far

Attachment 173988



Attachment 173989

With it just laid out

Attachment 173987