2015 Sony audio build
#11
OP: have you looked at the molex connectors in the doors yet?
#13
Senior Member
Thread Starter
#14
Senior Member
Thread Starter
So my build has been delayed due to missing tweeter brackets....
I can't find my supplied tweeter mounts for my Hertz HSK165...i've been in contact with them and i'm attempting to get a set from them as i cannot find ANYTHING on-line....
If any of you have a solution, please share!
thanks
I can't find my supplied tweeter mounts for my Hertz HSK165...i've been in contact with them and i'm attempting to get a set from them as i cannot find ANYTHING on-line....
If any of you have a solution, please share!
thanks
#15
So my build has been delayed due to missing tweeter brackets....
I can't find my supplied tweeter mounts for my Hertz HSK165...i've been in contact with them and i'm attempting to get a set from them as i cannot find ANYTHING on-line....
If any of you have a solution, please share!
thanks
I can't find my supplied tweeter mounts for my Hertz HSK165...i've been in contact with them and i'm attempting to get a set from them as i cannot find ANYTHING on-line....
If any of you have a solution, please share!
thanks
https://store.audiodesignscg.com/pro...aker-adapters/
#16
Senior Member
iTrader: (1)
So my build has been delayed due to missing tweeter brackets....
I can't find my supplied tweeter mounts for my Hertz HSK165...i've been in contact with them and i'm attempting to get a set from them as i cannot find ANYTHING on-line....
If any of you have a solution, please share!
thanks
I can't find my supplied tweeter mounts for my Hertz HSK165...i've been in contact with them and i'm attempting to get a set from them as i cannot find ANYTHING on-line....
If any of you have a solution, please share!
thanks
#17
Senior Member
Thread Starter
#18
Senior Member
Thread Starter
#19
Senior Member
Thread Starter
Got my tweeter mounts in and half installed!
Here's what I did for the molex plug...
I trimmed just a little at the bottom and it allowed my 14ga wire to pass through
I will finish the install with the resistors tomorrow
Here's what I did for the molex plug...
I trimmed just a little at the bottom and it allowed my 14ga wire to pass through
I will finish the install with the resistors tomorrow
#20
Thank you for the information but I'm not sure I understand the picture - are you having speaker wire run outside the boot? Or you trimmed both molex plugs? Sorry if I worded that confusing I really do appreciate your help.