Solcat

Hey guys, I recently traded my '12 for the '14 ecoboost xtr with the non touch screen, with no factory sub or fancy speakers. I would like to put my amp and sub in, normally I upgrade to a aftermarket head unit. But I like the factory look and want to keep my sync Sirius ect.... Plus I like all the blue lights and the looks haha, not looking to buy a bezel and the expensive harness and an aftermarket deck this time. Obviously I would need the amp kit for the amp that's a given.

My question is can I use the soundstream bx-20z to stay with the stock head unit? Just hook the high inputs up to the rear speakers? Or am I mistaken and completely off the path lol.

Anyone done this? Or have input? Any help is appreciated I'm looking to order the part on Friday to have it in for my trip the following weekend.

king nothing

It looks like you could use that piece, but I would use an audiocontrol Lc2i or even a regular Line Out Converter instead and tap the front speakers, not the rear. In my truck (13xlt) it seems like I have a fuller signal to the front, while the rear seems limited in the low range

Solcat

After taking a look at the lc2i i will probably be going that way, its available in my local stores so i wont have to order it in. Plus its owners/install Manual actually explains what im looking to do haha.
Thanks for your input and ill post how she goes.

Wyo11Scab

iTrader: (1)

I just put an amp and sub in mine. Tapped LOC off the rear channel. More than enough bass. It helps if you have a remote level control for your amp.

Solcat

Any of you have the speaker wire colors? I thought I seen it in the forum but can't seem to find it again, and then I found them on google only he goes so into depth about every wire leading to everything from nab to sync and hot wires and every type of stereo that I'm getting confused haha.

Wyo11Scab

iTrader: (1)

Google says
http://www.caraudio.com/forums/wirin...lor-codes.html