soks3d

Does the factory stereo in my truck have a sub output? No Sony unit, brand new vehicle. Looking for the wire diagram.

ReactiveD

No it doesnt. I have a 2013 non sony. Either if you get a amp with high inputs it is simple and just need wire, but if you get a amp with just rca jacks then will need a rca converter which is I beleive around $10 and walmart has them. Just tap into the rear speakers and run a power wire and remote up the passengerside use a mini fuse holder tap from advance or autozone and remove the fuse from the I beleive the radio fuse it is like 2 or 3 up from the bottom in the middle but look in book and check with wire tester. If it is correct your amp will stay on with the radio until a door is opened. Run your power to the battery and ground the amp with a wire no longer then the width of the amp to metal. All done. Take pictures and enjoy.

Wyo11Scab

iTrader: (1)

Read the thread on the FRD24. Use it. Plug n play.

soks3d

Thanks, I have been reading about that FRD24, are you sure it will work on the 2013?

Wyo11Scab

iTrader: (1)

Some say no but on another thread another said yes. Might want to verify that in the FRD24 topic thread.

soks3d

Ok, thanks
Pat