2011 f150 screw 5.0
#11
Senior Member
Thread Starter
ebay... actually got everything there. i don't normally shop via ebay, but when I was looking at pricing vs crutchfield, it just made sense. Saved a good chunk of change.
Picked up the Alpine PXE-H660 yesterday for $220.
Now I'm all set. Just waiting for everything to come in and then it'll be install time.
Picked up the Alpine PXE-H660 yesterday for $220.
Now I'm all set. Just waiting for everything to come in and then it'll be install time.
#12
Senior Member
Thread Starter
Eek. Got my speakers yesterday. All the specs say 2ohm (not 4 ohm as I expected). That means my amp will be at 75w per channel instead of 50w. Too much power? I'd hate to have to completely throttle the amp back to coincide with the sub amp (250w rms at 4ohms).
Or... may be I look for a 10" 2 ohm sub to throw in my sealed box. That may be a way to give it some extra giddy up.
First step... install everything. Still need to order wire. Suggestions on a good source?
Or... may be I look for a 10" 2 ohm sub to throw in my sealed box. That may be a way to give it some extra giddy up.
First step... install everything. Still need to order wire. Suggestions on a good source?
#13
Senior Member
Thread Starter
Well there goes that idea... the Sony amp I have can't bridge into 2ohms. I guess I could look into DVC @ 2ohms.
then again... patience... just patience. Need to install it all, then decide if a change is warranted.
then again... patience... just patience. Need to install it all, then decide if a change is warranted.
#14
Senior Member
iTrader: (2)
Eek. Got my speakers yesterday. All the specs say 2ohm (not 4 ohm as I expected). That means my amp will be at 75w per channel instead of 50w. Too much power? I'd hate to have to completely throttle the amp back to coincide with the sub amp (250w rms at 4ohms).
Or... may be I look for a 10" 2 ohm sub to throw in my sealed box. That may be a way to give it some extra giddy up.
First step... install everything. Still need to order wire. Suggestions on a good source?
Or... may be I look for a 10" 2 ohm sub to throw in my sealed box. That may be a way to give it some extra giddy up.
First step... install everything. Still need to order wire. Suggestions on a good source?
Also, unless you have 4-6v pre-outs and your volume is maxed out, you will never send the complete 75 rms to each speaker. I would go get a DMM(20 bucks) and set my gain according to that.
If you have the PXA H660, and it is set up properly it will lead you in the direction to how to get the appropriate gain for your vehicles acoustics and speakers power settings.
#15
Senior Member
Thread Starter
“DMM”: Domestic Mail Manual
“DMM”: Digital Molecular Matter
“DMM”: Digital Multi-Meter <-- yes?
“DMM”: Dynamic Memory Management
“DMM”: Deep Mixing Method (construction)
“DMM”: Designated Market Maker (investing)
“DMM”: Deluxe Memory Man (Guitar Effect Pedal)
“DMM”: Direct Metal Master
“DMM”: Data Management Module
“DMM”: Digital Music Manager
“DMM”: Design Methodology Manager
“DMM”: Diversity Maturity Model (Lockheed Martin)
“DMM”: Dance Music Magazine
“DMM”: District Merchandise Manager
“DMM”: Domain Management Module
“DMM”: Division Marketing Manager
“DMM”: Delay Modulation Mark
“DMM”: Disaster Mitigation and Management
“DMM”: Discrete Mode-Matching
I have a DMM, yes. And i'll have the PXE-H660 soon (on a UPS truck somewhere).
#16
Senior Member
iTrader: (2)
“DMM”: Domestic Mail Manual
“DMM”: Digital Molecular Matter
“DMM”: Digital Multi-Meter <-- yes?
“DMM”: Dynamic Memory Management
“DMM”: Deep Mixing Method (construction)
“DMM”: Designated Market Maker (investing)
“DMM”: Deluxe Memory Man (Guitar Effect Pedal)
“DMM”: Direct Metal Master
“DMM”: Data Management Module
“DMM”: Digital Music Manager
“DMM”: Design Methodology Manager
“DMM”: Diversity Maturity Model (Lockheed Martin)
“DMM”: Dance Music Magazine
“DMM”: District Merchandise Manager
“DMM”: Domain Management Module
“DMM”: Division Marketing Manager
“DMM”: Delay Modulation Mark
“DMM”: Disaster Mitigation and Management
“DMM”: Discrete Mode-Matching
I have a DMM, yes. And i'll have the PXE-H660 soon (on a UPS truck somewhere).
“DMM”: Digital Molecular Matter
“DMM”: Digital Multi-Meter <-- yes?
“DMM”: Dynamic Memory Management
“DMM”: Deep Mixing Method (construction)
“DMM”: Designated Market Maker (investing)
“DMM”: Deluxe Memory Man (Guitar Effect Pedal)
“DMM”: Direct Metal Master
“DMM”: Data Management Module
“DMM”: Digital Music Manager
“DMM”: Design Methodology Manager
“DMM”: Diversity Maturity Model (Lockheed Martin)
“DMM”: Dance Music Magazine
“DMM”: District Merchandise Manager
“DMM”: Domain Management Module
“DMM”: Division Marketing Manager
“DMM”: Delay Modulation Mark
“DMM”: Disaster Mitigation and Management
“DMM”: Discrete Mode-Matching
I have a DMM, yes. And i'll have the PXE-H660 soon (on a UPS truck somewhere).
#17
Senior Member
I don't think you have anything to worry about. Like you said - get it installed and go from there. I would recommend a bass control **** so you can adjust sub stage on the fly.
#18
Senior Member
Thread Starter
All my stuff...
Alpine PXE-H660
Sony Xplod 600w(p) amp for Sub
Rockford Fosgate Punch 10" P2
Infinity 682.9 speakers (4)
Rockford Fosgate Prime R300-4 for door drivers
Now I just need to find a day to install all this!
Alpine PXE-H660
Sony Xplod 600w(p) amp for Sub
Rockford Fosgate Punch 10" P2
Infinity 682.9 speakers (4)
Rockford Fosgate Prime R300-4 for door drivers
Now I just need to find a day to install all this!
#20
Senior Member
Thread Starter
Just sent OnlineCarStereo a nasty gram. 11 days ago i ordered product (wire, etc...). According to their website, it has not yet shipped. 11 damn days! Every product I chose was "instock", according to the website.
I was hoping to start the installation Monday.
Argh!
I was hoping to start the installation Monday.
Argh!