2009+ f150: Please post pictures of where your amp is mounted
#11
Thank you my friend. That really helps! I'm guessing your PAC is behind the stereo. Now where is your AudiControl LC6i?
Yeah here you go bud
Attachment 184331
Lol there is wires everywhere!
Yea you have to have one
And I have a PAC and it sounds great!
Attachment 184331
Lol there is wires everywhere!
Yea you have to have one
And I have a PAC and it sounds great!
#12
Senior Member
#13
Senior Member
probably a stupid question to most. call me a noob if you must. but, what is the trick to folding the rear seats DOWN? i notice most of you guys are mounting your amps BEHIND the rear seat, not UNDER it. how do you fold those seats down? i don't see any sort of release lever back there....
#14
[IMG][/IMG]
JBL GTO-751EZ and JBL GTO-804EZ
I removed the back padding, used self tapping screws to attach the amps, removed the amps, put 1-1/2 long screws in the place, cut the padding around the screws, re-attached the amps.
I ran the power wire on the driver side under the door stills and the RCA's and speaker on the passenger side.
I'm going to move the ground wire to the seat mounting bolts when I get a 18 MM deep socket.
JBL GTO-751EZ and JBL GTO-804EZ
I removed the back padding, used self tapping screws to attach the amps, removed the amps, put 1-1/2 long screws in the place, cut the padding around the screws, re-attached the amps.
I ran the power wire on the driver side under the door stills and the RCA's and speaker on the passenger side.
I'm going to move the ground wire to the seat mounting bolts when I get a 18 MM deep socket.
The following users liked this post:
larryt1026 (01-23-2013)
#16
I like the way your setup looks! What are those two oval looking things next to the amp? Also, how did you mount your amp rack? Drilled into the back of the truck wall? Thanks!
#17
Senior Member
#18
Senior Member
probably a stupid question to most. call me a noob if you must. but, what is the trick to folding the rear seats DOWN? i notice most of you guys are mounting your amps BEHIND the rear seat, not UNDER it. how do you fold those seats down? i don't see any sort of release lever back there....
#19
Senior Member
There Is a little metal button lever thing on the top part of the seat latch you have to reach behind the top of the seat and pull up on that latch.
I attached a wire to mine and looped it around the post for the head rest so I can do it easy
Hope that helps
I attached a wire to mine and looped it around the post for the head rest so I can do it easy
Hope that helps
#20
Those are crossovers for my front pillar tweeters. I mounted the amp on to 3/4 inch particle board, which I screwed to the back wall. There are a few points on the rear wall that are raised enough to set screws into without going thru the back.
The following users liked this post:
DaveWMFD (09-11-2013)