2004-2008 Audio Basics
#301
Oh, like the metal thing that goes over the plastic tabs?
Did they break off or just stick in the holes? If they broke you'll have to replace the panel, but if they just stuck in the hole (fell off the plastic tab) you should be able to use a small flathead and pry them out and reattach to the panel.
Did that make sense?
Did they break off or just stick in the holes? If they broke you'll have to replace the panel, but if they just stuck in the hole (fell off the plastic tab) you should be able to use a small flathead and pry them out and reattach to the panel.
Did that make sense?
#302
wrong PAC interface?
I've got a 2004 (new model) F-150 Lariat with the 6cd audiophile head unit and subwoofer and want to install a Pioneer Avic F30BT (similar as F930BT). My radio guy over here in Belgium sold me a package-deal that included a PAC C2r-FRD 1 interface. I tried to install, but nothing happens (seems like there's no power to the HU or interface). Could it be I'm using the wrong interface. Perhaps the SWI-SR as mentioned before in #133 would be a better/the wright interface for this setup?
Last edited by luckypete21; 12-26-2013 at 06:23 PM.
#303
"Q16: I want to install an aftermarket amplifier, can I keep my stock head unit?
Yes! You have two choices, either buy an amplifier with speaker level inputs or buy a "Line Output Converter" (LOC) to change the speaker level signal to a low (RCA) level signal. You can get a lot of different LOCs and prices range from $20 to $500+.
Basic LOCs are available from companies like Scoshe, PAC, and Stinger. DavidNavone.com has some well respected ones.
The next step are Bass Restoration Processor LOCs, like some Audiocontrol units and the MTX Re-Q series.
The best of the best have built in "Digital Signal Processing" (DSP) and the ability to sum signals that have been split. These include the JL Audio Cleansweep and the Rockford Fosgate 3Sixty series."
I found http://pac-audio.com/productDetails....&CategoryID=28 this from one of your links. Has anyone used it? and how well did it work?
Yes! You have two choices, either buy an amplifier with speaker level inputs or buy a "Line Output Converter" (LOC) to change the speaker level signal to a low (RCA) level signal. You can get a lot of different LOCs and prices range from $20 to $500+.
Basic LOCs are available from companies like Scoshe, PAC, and Stinger. DavidNavone.com has some well respected ones.
The next step are Bass Restoration Processor LOCs, like some Audiocontrol units and the MTX Re-Q series.
The best of the best have built in "Digital Signal Processing" (DSP) and the ability to sum signals that have been split. These include the JL Audio Cleansweep and the Rockford Fosgate 3Sixty series."
I found http://pac-audio.com/productDetails....&CategoryID=28 this from one of your links. Has anyone used it? and how well did it work?
#304
I was checking out my factory radio and noticed that I have a factory subwoofer under the rear seat. However I do not have an audiophile radio and while reading through the forum I see where sometime they get swapped out.
Now I have not taken the radio out yet so I am assuming that since I have a factory sub then I should have three plugs behind the radio but only two in use.
I purchased a ford radio from amazon that was actually in a Ford 500 that has three plugs on the back of it.
From my reading the third plug is for the subwoofer and that is why I got the radio.
Now is this plug and play or is there some programming that needs to be done?
Now I have not taken the radio out yet so I am assuming that since I have a factory sub then I should have three plugs behind the radio but only two in use.
I purchased a ford radio from amazon that was actually in a Ford 500 that has three plugs on the back of it.
From my reading the third plug is for the subwoofer and that is why I got the radio.
Now is this plug and play or is there some programming that needs to be done?
#305
PnP as long as your radio has the plug.
Also, some of those systems were designed to have an external amp, so if it works you're good. If not you have the wrong radio.
Also, some of those systems were designed to have an external amp, so if it works you're good. If not you have the wrong radio.
#306
Weird thing today as I was pulling my radio out to switch it today I noticed that my Radio had three plugs on it but did not have MP3 capability. So I have and audiophile and I thought all audiophile radios played MP3 cd's.
Now the question is when burning a CD with mp3 does it have to be burned as an MP3 cd or just a standard cd with MP3 on it.
Now the question is when burning a CD with mp3 does it have to be burned as an MP3 cd or just a standard cd with MP3 on it.
#307
Either way will work.
But not all audiophile decks have MP3, my dads 08 didn't - but it had a sub and all the other stuff and 6 CD changer, but no mp3 ability.
I think they made like 5-6 different audiophile radios. Each with varying degrees of options and/or chrome **** crowns. Idk why.
But not all audiophile decks have MP3, my dads 08 didn't - but it had a sub and all the other stuff and 6 CD changer, but no mp3 ability.
I think they made like 5-6 different audiophile radios. Each with varying degrees of options and/or chrome **** crowns. Idk why.
#308
Junior Member
I was checking out my factory radio and noticed that I have a factory subwoofer under the rear seat. However I do not have an audiophile radio and while reading through the forum I see where sometime they get swapped out.
Now I have not taken the radio out yet so I am assuming that since I have a factory sub then I should have three plugs behind the radio but only two in use.
I purchased a ford radio from amazon that was actually in a Ford 500 that has three plugs on the back of it.
From my reading the third plug is for the subwoofer and that is why I got the radio.
Now is this plug and play or is there some programming that needs to be done?
Now I have not taken the radio out yet so I am assuming that since I have a factory sub then I should have three plugs behind the radio but only two in use.
I purchased a ford radio from amazon that was actually in a Ford 500 that has three plugs on the back of it.
From my reading the third plug is for the subwoofer and that is why I got the radio.
Now is this plug and play or is there some programming that needs to be done?
#309
Rear Support
I wish someone made a simple piece to support a aftermarket radio in the rear that uses the big round hole the oem radio uses. I can make a bracket, I just don't feel like it. YES I am being lazy
#310
Senior Member
2 factory plugs, 1 plug in the adapter kit question
Hello all, first time post here about a stereo install question. I have a 2004 F150 with the factory stereo. On the back of the stereo there are 2 plugs, I am installing a Boss double din with touchscreen an nav. My question is: I have been looking at the wiring harness adapter so that I do not have to cut my harness, the package comes with 1 plug adapter that has the power, ground, speaker wires, etc. What do I do with the additional plug on the actual vehicle harness? Do I buy a separate connector and splice that into the other and connect it to the new stereo or leave it disconnected? I do not have the factory sub by the way and the new stereo's extra connection on back is all RCA plugs of which my wiring harness has none of these? Can someone give me an idea of what to do here. Thank you and this is a great thread.
Tom
Tom