Topic Sponsor
Stereo/Audio Come discuss all Ford F150 Stereo and Audio questions here!
Sponsored by:
Sponsored by: The Magic Brand

16 SCrew non Sony Upgrade project

Thread Tools
 
Search this Thread
 
Old 04-01-2016, 07:58 AM
  #21  
Senior Member
Thread Starter
 
rritch's Avatar
 
Join Date: Feb 2016
Posts: 232
Received 34 Likes on 32 Posts

Default

Here are a couple pictures of the Hideaway installed.





Old 04-01-2016, 08:51 AM
  #22  
Member
 
UH60Hosier's Avatar
 
Join Date: Oct 2015
Posts: 86
Received 15 Likes on 12 Posts

Default

Originally Posted by rritch
Here are a couple pictures of the Hideaway installed.





Did they tap into the speaker line directly or did they use a LOC?
Old 04-01-2016, 08:55 AM
  #23  
Senior Member
Thread Starter
 
rritch's Avatar
 
Join Date: Feb 2016
Posts: 232
Received 34 Likes on 32 Posts

Default

Originally Posted by UH60Hosier
Did they tap into the speaker line directly or did they use a LOC?
You saw that too? They used speaker inputs. I actually played with the hi/lo input switch some and when I change it to Hi, the sub output went way down. Going to play with is a little more, because at the same time I tried the phase at 0. Going to try changing input to hi and leave phase at 180 and see what happens. Ultimately things will get dialed in once the front and rears are installed on Sunday.
Old 04-01-2016, 09:00 AM
  #24  
Member
 
UH60Hosier's Avatar
 
Join Date: Oct 2015
Posts: 86
Received 15 Likes on 12 Posts

Default

Originally Posted by rritch
You saw that too? They used speaker inputs. I actually played with the hi/lo input switch some and when I change it to Hi, the sub output went way down. Going to play with is a little more, because at the same time I tried the phase at 0. Going to try changing input to hi and leave phase at 180 and see what happens. Ultimately things will get dialed in once the front and rears are installed on Sunday.
Bingo... that was what I was curious on. Hopefully better once you get the fronts complete and all dialed in.
Old 04-01-2016, 09:34 AM
  #25  
Senior Member
Thread Starter
 
rritch's Avatar
 
Join Date: Feb 2016
Posts: 232
Received 34 Likes on 32 Posts

Default

Originally Posted by UH60Hosier
Bingo... that was what I was curious on. Hopefully better once you get the fronts complete and all dialed in.
Just ran out and gave it another quick tweak. Changed the input to Hi left phase at 180, and the crossover at approximately 90hz as well as made some changes on the HU settings. Now the bass is hitting good and tight with no rumble or distortion and there is a good blend between the sub and the stock speaker mid bass. Going to leave it alone now until the new speakers are installed
Old 04-01-2016, 10:26 AM
  #26  
Member
 
UH60Hosier's Avatar
 
Join Date: Oct 2015
Posts: 86
Received 15 Likes on 12 Posts

Default

Originally Posted by rritch
Just ran out and gave it another quick tweak. Changed the input to Hi left phase at 180, and the crossover at approximately 90hz as well as made some changes on the HU settings. Now the bass is hitting good and tight with no rumble or distortion and there is a good blend between the sub and the stock speaker mid bass. Going to leave it alone now until the new speakers are installed
The installer may have switch the + & - wires on the input signal.
Old 04-01-2016, 11:44 AM
  #27  
Member
 
Slider57's Avatar
 
Join Date: Nov 2015
Location: Denver, CO
Posts: 38
Received 4 Likes on 3 Posts
Default

Stage 3 Motorsports has the door panel removal video.

Old 04-01-2016, 11:47 AM
  #28  
Senior Member
Thread Starter
 
rritch's Avatar
 
Join Date: Feb 2016
Posts: 232
Received 34 Likes on 32 Posts

Default

Originally Posted by Slider57
Stage 3 Motorsports has the door panel removal video.

http://youtu.be/DCEIE8oEzr4
There is a better one that a member here posted showing specifically how to remove the cable, but I can not find it now.
Old 04-01-2016, 02:43 PM
  #29  
Senior Member
Thread Starter
 
rritch's Avatar
 
Join Date: Feb 2016
Posts: 232
Received 34 Likes on 32 Posts

Default

Originally Posted by UH60Hosier
The installer may have switch the + & - wires on the input signal.
I have seen quite a few other people post that there sounded better at 180 in 2015 and 2016 SCrews.
Old 04-03-2016, 06:39 PM
  #30  
Senior Member
Thread Starter
 
rritch's Avatar
 
Join Date: Feb 2016
Posts: 232
Received 34 Likes on 32 Posts

Default

I had the Polk DB's installed today. Have not had too much time to play but my initial impression is that it sounds WAY better now. Interestingly enough I had to change the phase to 0 and bring the level up on the hideaway to get a smooth blend with them. I still need to do some more tweaking as the Polks break in, but the muddy mid's and hi's are gone. Now it is nice and clean. Overall volume is about the same as with the factory speakers so it appears the HU can adequately drive them without an add on amp. I will post pics of all the settings once I get it all tweaked. Overall I think this was a great upgrade for about $600. That is significantly less than the Kicker systems available from the dealer and I suspect comparable in sound, and better than the factory Sony System.


Quick Reply: 16 SCrew non Sony Upgrade project



All times are GMT -4. The time now is 01:40 AM.