Topic Sponsor
Stereo/Audio Come discuss all Ford F150 Stereo and Audio questions here!
Sponsored by:
Sponsored by: The Magic Brand

11 radio bezel help needed

Thread Tools
 
Search this Thread
 
Old 06-27-2013, 08:41 AM
  #1  
Member
Thread Starter
 
sacarmic's Avatar
 
Join Date: Jun 2011
Posts: 32
Received 1 Like on 1 Post

Default 11 radio bezel help needed

So I am replacing the radio in my 11 lariat. I am using the Scosche install kit for the new radio. That still leaves me with two pieces in the center console that are the ugly faux maple trim. I know the fx4 has a faux black carbon fiber look to the trim. Are there any other models that have the look of the Scosche bezel which is similar or close to its flat satin type look?

Thanks,
Scott
Old 06-27-2013, 08:48 AM
  #2  
Senior Member
 
bubbabud's Avatar
 
Join Date: Jul 2011
Location: Tonopah. AZ.
Posts: 3,380
Received 502 Likes on 324 Posts

Default

XLT trim might be what you want and it can be painted if needed
Old 06-27-2013, 08:51 AM
  #3  
Member
Thread Starter
 
sacarmic's Avatar
 
Join Date: Jun 2011
Posts: 32
Received 1 Like on 1 Post

Default

Thanks, does the XLT have the shifter on the floor or the column?
Old 06-27-2013, 09:36 AM
  #4  
Senior Member
 
jeremyha's Avatar
 
Join Date: Apr 2013
Posts: 367
Received 52 Likes on 35 Posts

Default

Originally Posted by sacarmic
Thanks, does the XLT have the shifter on the floor or the column?
column, that's what my 2011 eco screw 4x4
Old 06-27-2013, 09:38 AM
  #5  
Member
Thread Starter
 
sacarmic's Avatar
 
Join Date: Jun 2011
Posts: 32
Received 1 Like on 1 Post

Default

YEah, I need to match a trim with the floor shifter because that is what my lariat is.
Old 06-27-2013, 11:07 AM
  #6  
Senior Member
iTrader: (1)
 
Wyo11Scab's Avatar
 
Join Date: Jul 2011
Location: Victoria,TX
Posts: 4,302
Received 484 Likes on 437 Posts

Default

Originally Posted by sacarmic
YEah, I need to match a trim with the floor shifter because that is what my lariat is.
I have never seen one.
Old 06-27-2013, 10:24 PM
  #7  
Junior Member
 
BadFX's Avatar
 
Join Date: Jun 2013
Location: DFW
Posts: 18
Likes: 0
Received 3 Likes on 3 Posts
Default

I have an FX package and I had my kit hydrodipped in a gloss black to match pretty closely. There is a wide selection of films that can be used to dip. You might want to look into that option. Much better than painting or wrapping.
Old 06-28-2013, 08:18 AM
  #8  
Member
Thread Starter
 
sacarmic's Avatar
 
Join Date: Jun 2011
Posts: 32
Received 1 Like on 1 Post

Default

OK, thanks for the tip BadFX



Quick Reply: 11 radio bezel help needed



All times are GMT -4. The time now is 08:11 AM.