locking hubs
#2
workin for parts!!!
been a while since i did one of those,but here goes.lift front end and use jackstands. remove tires. take out cap screws. remove lockring seated in the brake rotor. i used to them screw in 2 of the cap bolts back into the hub assembly to help pull it out of the hub. i can't remember if there is another snap ring on the spindle but if there is hopefully you'll see it. assembly is the reversal. when i first started doing this i used to get a piece of cardboard to lay the parts on in order of disassembly to aid in assambly. if you plan on keeping this truck may i suggest a chilton or hayes manual. they're GGREAT. if i've forgotten a step or 2 hopefully someone will help.
#3
yes 05 super explained it compleatly i just did it on my truck and all what super 05 said was 100% and yes a chiltons manual is very convient not only for this project but for every thing