First post with this forum
#1
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Minnesota
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
First post with this forum
Hey guys so I have been doing a lot of reading on this site for the past couple of years and finally decided I should probably become a part of this wonderful place. It looks to me like most guys have a pretty good understanding of most everything and I feel my input may possibly help someone out. My biggest question I have right now is with the Edge CS programmer custom settings. I have been doing a lot of research on this to get a rough idea on what guys are running and giving them the most out of their trucks. This is my second Edge programmer so I am not new to them just some of the settings on there. I play around with them daily to try and find a good combo but am stuck on what I should be running. The programmer has a custom Gryphon tune already but it seems to me that my truck literally falls on its face at high rpms. I feel as if it runs better with the settings that I have than it does with the custom tune. I dont have any sort of detonation or any funny noises coming from anywhere but I do notice that my truck doesnt really open up and pull hard until after 2000RPMS or so?? I bought the programmer used for $250 with the custom tune on it and was told if I updated it I would loose that custom tune?
RPM: 5750
MPH: 125
Shift Firmness 25% all gears
WOT 1.50
Timing +2*
everything else besides the tire size is stock......let me know what you guys think about the settings I have.....I tow all the time and long distances most of the time......looking for the best performance for this as I do most of my towing in the mountains......
RPM: 5750
MPH: 125
Shift Firmness 25% all gears
WOT 1.50
Timing +2*
everything else besides the tire size is stock......let me know what you guys think about the settings I have.....I tow all the time and long distances most of the time......looking for the best performance for this as I do most of my towing in the mountains......
Last edited by 05SprCrw; 03-04-2015 at 10:31 PM. Reason: adding to post
#2
Thanks for joining, it's great to have you here
Tony
Tony