07 f-150 4.6 liter k&n air intake
10-10-2007, 12:07 PM
#2
Driver carries no money.
Join Date: Sep 2007
Location: TYLER, TEXAS
Posts: 1,076
Likes: 0
Received 0 Likes
on
0 Posts
10-10-2007, 03:06 PM
#3
FULL BLOODED AMERICAN!!!!
Join Date: Apr 2007
Location: Jacksonville, Florida
Posts: 5,179
Likes: 0
Received 2 Likes
on
2 Posts
Welcome to the site. Unfortunately K&N doesn't make an intake for the 2007's with the 4.6liter v8 but there are plenty other companies that do. I ordered a K&N series 77 intake from the same place that NGM did. I had it almost fully installed and got to the MAF sensor and realized that it wouldn't fit. I called K&N and they said that they don't make an intake for the 07' 4.6 v8.
www.troyerperformance.com sells the AF1 which I've heard is the best for our trucks. If you do get the AF1 make sure you get the 3" piping because the 3.5 will make it run to rich/lean.
Hope this helps!!
www.troyerperformance.com sells the AF1 which I've heard is the best for our trucks. If you do get the AF1 make sure you get the 3" piping because the 3.5 will make it run to rich/lean.
Hope this helps!!
Last edited by Triton v8; 10-10-2007 at 03:08 PM.
10-12-2007, 04:47 PM
#5
Junior Member
Thread Starter
Join Date: Oct 2007
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
wow $219.95 for the airaid intake sys for my truck not bad it should give me 9 h.p. and increase 13lb's of torque to the rear wheel 1-3 miles of improvment,the guy says its the only one available out there prt # 400-141-1
thanks guys ill let you know how it works....:-)
thanks guys ill let you know how it works....:-)
