|WYG|SS

i got a 93 f150. i want to put some light on my truck that will go on when i turn on my parking lights. then put some on for the turn signals. i want to hook them up to the 4 plug trailer connector. the light i want to put on are strip of 3 like the chevy duallys have under the tail gate. and then i will add 2 light for turn signal.

Good old Bill

DK GRN=RIGHT TURN/STOP
YEL=LEFT TURN/STOP
BRN/WHITE=PARKING
WHITE=GROUND

At least that is for my 02

|WYG|SS

these lights are LED and rectangle. i want to put the strip of three on for my running lights and the other two i just want to wire them up for turn signals that would go on when ever ij put my blinker on. if i put those two extra on, one for right turn and one for left turn. cause that has two funtions for the left and right turn signals could i burn out the lights?

Good old Bill

See no problem as long as the center three are wire together to the Brn/white, and the outside bulbs to the respective color. Your idea is right on. As long as the LED is for 12 volts, you are good to go.

|WYG|SS

now if i just put the 3 lights on their and get rid of the 2 i wanted to add on for turn signals coul i just splice the 1 and 3 light to work for either turn signals? if i hook them up to my trailer connector they will all be on for parking lights and the two end ones will light up for brakes and either turn. if i do this can i burn the two end ones up?

Good old Bill

Am a little confused, sounds like you want to downsize to three lights. All on for running and the outside for two for turn and stop. Answer is no, unless the outside #1 & 3 have dual filaments. Not sure LED's come that way. You can have 1 & 5 as turn/stop and 2 thru 4 as running. Hopefully more exprienced guys will tune in.

|WYG|SS

sry to confuse u. thats wut was wondering if it had to be double filaments. i will probably go with 5 lights. just one more question, are the brake and turn hooked up to one filament on the tail light and the other filament for the running lights.

TheJMC

A 4 plug connector has 4 circuits. 1st, Brakes; lights both turn signal filaments at the same time. 2nd, left turn; lights the left turn signal filament. 3rd, Right turn; lights the right turn signal filament. 4th, parking lamps; lights the Park lamp filament or a separate parking light. If you Google it you will find combination Park / turn led bulbs.

.