Topic Sponsor
General F150 Discussion General Ford F150 truck discussions and questions
Sponsored by:
Sponsored by:

Tire Rubbing?

Thread Tools
 
Search this Thread
 
Old 10-29-2015, 08:24 PM
  #1  
Junior Member
Thread Starter
 
rsjohnsn's Avatar
 
Join Date: May 2015
Location: East Tennessee
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Tire Rubbing?

Hi all, I have a 2014 F150 FX4 with the optional 20 inch wheels. I have a 2.5 inch levelling kit from Rough Country and before I install it I want to get the tires. Will the 35/12.50x20 Nitto Terra Grappler G2 fit with no rubbing or do I need to trim? I have seen that some are running 35's with this lift and no issues but most have aftermarket wheels. I plan on keeping my factory rims and not sure if I can do that and run the 35's.
Old 10-29-2015, 09:40 PM
  #2  
Senior Member
 
flyinpig14's Avatar
 
Join Date: Feb 2015
Location: Shreveport, LA
Posts: 492
Received 60 Likes on 56 Posts
Default

Originally Posted by rsjohnsn
Hi all, I have a 2014 F150 FX4 with the optional 20 inch wheels. I have a 2.5 inch levelling kit from Rough Country and before I install it I want to get the tires. Will the 35/12.50x20 Nitto Terra Grappler G2 fit with no rubbing or do I need to trim? I have seen that some are running 35's with this lift and no issues but most have aftermarket wheels. I plan on keeping my factory rims and not sure if I can do that and run the 35's.
I don't know for sure but I would be concerned about rubbing on the UCA with the 12.5 width on stock rims. Just a guess though.i know 285 or 295 is usually pretty close to it.
Old 10-29-2015, 09:45 PM
  #3  
Senior Member
 
gDMJoe's Avatar
 
Join Date: Nov 2010
Location: Timbuk3, MI
Posts: 11,854
Received 2,527 Likes on 1,951 Posts

Lightbulb

For your consideration ......

HINT/TIP: You'll find posting in the
Late Model F150s > 2009 - 2014 Ford F150
section more helpful/appropriate than General F150 Discussion posts.

-REFERENCE-
.



Quick Reply: Tire Rubbing?



All times are GMT -4. The time now is 03:17 PM.