Seat Belt
01-24-2007, 12:05 AM
#1
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Seat Belt
Hey guys
i have an 04 150 and i was wondering if anyone has found a way to bypass the occupant sensors. I've read elsewhere that the only people that can bypass is Ford themselves, but they refuse to perfrom it. So i was just wondering if anyone has found a way around the annoying sound when the seatbelt isnt buckled.
thanks guys
i have an 04 150 and i was wondering if anyone has found a way to bypass the occupant sensors. I've read elsewhere that the only people that can bypass is Ford themselves, but they refuse to perfrom it. So i was just wondering if anyone has found a way around the annoying sound when the seatbelt isnt buckled.
thanks guys
01-24-2007, 12:36 AM
#2
08 February TOTM
Join Date: Nov 2006
Location: Dumfries, VA Member: #77
Posts: 3,184
Likes: 0
Received 19 Likes
on
7 Posts
It tells you how to do it in your owners manual, but here are two ways it can be done. The second one worked for me but you have to follow it to a T
The parking brake is set.
The truck/car is in Park (automatic), Neutral (manual).
The ignition is OFF.
All doors are closed.
The driver's safety belt is un-buckled.
The parking and headlights are OFF.
Then follow these 9 steps:
Turn the ignition switch to ON, but DO NOT START.
Wait for the safety belt warning light to go OFF(1-2 minutes).
Steps 3-5 MUST be completed within 60 seconds!
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
Turn on the headlights, turn off the headlights.
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
After step 5, th e Safety Belt Warning Light will be turned on for 3 seconds.
Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt.
This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.
Confirmation of the disabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds.
Confirmation of the enabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds, followed by 3 seconds with the safety belt light off, then followed by flashing the safety belt light 4 times per second for 3 seconds again.
After confirmation, the deactivation/activation of the Belt Minder procedure is complete
------------------------------------------------------------------------
I tried that on my 05 and it didn't work...
what I did was:
The parking brake is set.
The truck/car is in Park (automatic), Neutral (manual).
The ignition is OFF.
All doors are closed.
The driver's safety belt is un-buckled.
The parking and headlights are OFF.
Then follow these 9 steps:
Turn the ignition switch to ON, but DO NOT START.
Wait for the safety belt warning light to go OFF(1-2 minutes).
Steps 3-5 MUST be completed within 50 seconds!
buckle and unbuckle 9 times light thn flashes quickly and within 7 secs buckle unbuckle one more time.
you gotta do that for each side too but it was the only way mine
The parking brake is set.
The truck/car is in Park (automatic), Neutral (manual).
The ignition is OFF.
All doors are closed.
The driver's safety belt is un-buckled.
The parking and headlights are OFF.
Then follow these 9 steps:
Turn the ignition switch to ON, but DO NOT START.
Wait for the safety belt warning light to go OFF(1-2 minutes).
Steps 3-5 MUST be completed within 60 seconds!
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
Turn on the headlights, turn off the headlights.
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
After step 5, th e Safety Belt Warning Light will be turned on for 3 seconds.
Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt.
This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.
Confirmation of the disabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds.
Confirmation of the enabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds, followed by 3 seconds with the safety belt light off, then followed by flashing the safety belt light 4 times per second for 3 seconds again.
After confirmation, the deactivation/activation of the Belt Minder procedure is complete
------------------------------------------------------------------------
I tried that on my 05 and it didn't work...
what I did was:
The parking brake is set.
The truck/car is in Park (automatic), Neutral (manual).
The ignition is OFF.
All doors are closed.
The driver's safety belt is un-buckled.
The parking and headlights are OFF.
Then follow these 9 steps:
Turn the ignition switch to ON, but DO NOT START.
Wait for the safety belt warning light to go OFF(1-2 minutes).
Steps 3-5 MUST be completed within 50 seconds!
buckle and unbuckle 9 times light thn flashes quickly and within 7 secs buckle unbuckle one more time.
you gotta do that for each side too but it was the only way mine
01-24-2007, 12:56 AM
#3
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
hey thanks alot for the detailed post ill be sure to try both methods out tomorrow. is there anything else to the second part it looks like maybe it got cut off. thanks tho
01-24-2007, 01:28 AM
#4
08 February TOTM
Join Date: Nov 2006
Location: Dumfries, VA Member: #77
Posts: 3,184
Likes: 0
Received 19 Likes
on
7 Posts
Sorry here is the second way, again this is the one that worked for me.
If that didn't work make sure you did it exactly right it worked for me. If you did it right then try this one. This was from the same old post just another way to do it. This one didn't work on my truck but did work for others.
Again follow it to a T.
The parking brake is set.
The truck/car is in Park (automatic), Neutral (manual).
The ignition is OFF.
All doors are closed.
The driver's safety belt is un-buckled.
The parking and headlights are OFF.
Then follow these 9 steps:
Turn the ignition switch to ON, but DO NOT START.
Wait for the safety belt warning light to go OFF(1-2 minutes).
Steps 3-5 MUST be completed within 60 seconds!
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
Turn on the headlights, turn off the headlights.
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
After step 5, th e Safety Belt Warning Light will be turned on for 3 seconds.
Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt.
This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.
Confirmation of the disabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds.
Confirmation of the enabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds, followed by 3 seconds with the safety belt light off, then followed by flashing the safety belt light 4 times per second for 3 seconds again.
After confirmation, the deactivation/activation of the Belt Minder procedure is complete.
If that didn't work make sure you did it exactly right it worked for me. If you did it right then try this one. This was from the same old post just another way to do it. This one didn't work on my truck but did work for others.
Again follow it to a T.
The parking brake is set.
The truck/car is in Park (automatic), Neutral (manual).
The ignition is OFF.
All doors are closed.
The driver's safety belt is un-buckled.
The parking and headlights are OFF.
Then follow these 9 steps:
Turn the ignition switch to ON, but DO NOT START.
Wait for the safety belt warning light to go OFF(1-2 minutes).
Steps 3-5 MUST be completed within 60 seconds!
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
Turn on the headlights, turn off the headlights.
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
After step 5, th e Safety Belt Warning Light will be turned on for 3 seconds.
Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt.
This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.
Confirmation of the disabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds.
Confirmation of the enabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds, followed by 3 seconds with the safety belt light off, then followed by flashing the safety belt light 4 times per second for 3 seconds again.
After confirmation, the deactivation/activation of the Belt Minder procedure is complete.
01-24-2007, 11:51 AM
#7
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
lol its not really my seatbelt im worried about. its just when i have passengers or my 100lbs lab sittin shotgun it tends to get annoying,listening to the beep. click it or ticket.
Trending Topics
06-08-2007, 05:28 PM
#10
Member
Join Date: Jun 2007
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Its in your handbook
It worked for my 04 screw but I think you have to have somebody in the passenger seat with you and do it at the same time. I did it by myself and only the drivers side alarm stoped chirping. When there is a person sitting in the passenger seat without a seatbelt it will chirp or chime? If you don't have your handbook Email me to remind me and I will get it to you. If I am not mistaken you have to lock and unlock it 9 times. not 3. Let me know if you still need help.