Topic Sponsor
General F150 Discussion General Ford F150 truck discussions and questions
Sponsored by:
Sponsored by:

need some help with lift

Thread Tools
 
Search this Thread
 
Old 03-24-2014, 02:19 AM
  #1  
Junior Member
Thread Starter
 
Kingranch253's Avatar
 
Join Date: Jan 2013
Location: Alabama
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default need some help with lift

Just bought a 2012 xlt screw 4x4. I have nitto Terra grapplers 35-12.50. From my previous 2007 king ranch. The ranch was leveled but still had rubbing issues when wheels were turned. Don't want the same issue this go around. Don't know much about lifts. Don't want to spend a arm or leg either or start messing with suspension and changing the factory settings on suspension. Any help with leveling advice or lift kit would be appreciated. Also what is the level difference in the 2012.
Old 03-24-2014, 03:44 AM
  #2  
King Lariat
 
KevFord1993's Avatar
 
Join Date: Apr 2012
Location: Canadia
Posts: 1,169
Received 60 Likes on 54 Posts
Default

Depends how big that levelling kit is if you will clear or not as well as wheels specs.
Old 03-24-2014, 09:21 PM
  #3  
Junior Member
Thread Starter
 
Kingranch253's Avatar
 
Join Date: Jan 2013
Location: Alabama
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Tires are lt 325/50 and 1/4" spacers. I don't know which level kit to get to level the truck. 1 1/2", 2", 2 1/2".
Old 03-25-2014, 12:31 AM
  #4  
Junior Member
Thread Starter
 
Kingranch253's Avatar
 
Join Date: Jan 2013
Location: Alabama
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Going to go measure tire to fender well tomorrow to see what size leveling kit I need. I would mind raising the back up 1" also. Anybody have any suggestions on a good quality leveling kit that will do this to front and back. Thanks for help
Old 03-25-2014, 12:32 AM
  #5  
Junior Member
Thread Starter
 
Kingranch253's Avatar
 
Join Date: Jan 2013
Location: Alabama
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Going to go measure tire to fender well tomorrow to see what size leveling kit I need. I wouldn't mind raising the back up 1" also. Anybody have any suggestions on a good quality leveling kit that will do this to front and back. Thanks for help
Old 03-25-2014, 03:21 AM
  #6  
King Lariat
 
KevFord1993's Avatar
 
Join Date: Apr 2012
Location: Canadia
Posts: 1,169
Received 60 Likes on 54 Posts
Default

Procomp nitro kit will do front and rear.

I'd do 2.25" up front and 1" in the rear should level it out perfectly.
Old 03-26-2014, 09:21 AM
  #7  
Junior Member
Thread Starter
 
Kingranch253's Avatar
 
Join Date: Jan 2013
Location: Alabama
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

I can't find the procomp nitro for the f150. Just for a Toyota. Anybody have any feedback on 2004-2013 rough country 570 p- suspension leveling kit performance 2.2
Old 03-26-2014, 12:06 PM
  #8  
Member
 
1bad6's Avatar
 
Join Date: Mar 2014
Location: michigan
Posts: 67
Likes: 0
Received 6 Likes on 6 Posts
Default

i just ordered the rancho quick lift i hear its pretty good i will let you know
Old 03-26-2014, 12:10 PM
  #9  
Senior Member
 
harrison14allen's Avatar
 
Join Date: Jan 2011
Location: Brenham, TX
Posts: 2,278
Received 108 Likes on 91 Posts

Default

I got a rough country 2.5 inch level for the front and a 1 inch block in the back. I installed it myself with a buddy so it wasn't too hard. It sits pretty well but I couldn't tell you if it would clear your 35's without rubbing or not
Old 03-26-2014, 02:06 PM
  #10  
Junior Member
 
ianc199623's Avatar
 
Join Date: Mar 2014
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

rough country 2.25 leveling kit! easy to install. and is cheap for its quality. or if i understand this right, you could just get billistein 5100's and they raise the front up 2.5 inches. and you'll get a better ride.



Quick Reply: need some help with lift



All times are GMT -4. The time now is 03:45 AM.