Lets see those plasti-dip projects
The following users liked this post:
Wannafbody (08-08-2015)
#853
Senior Member
Other than that I've touched it up once but that was probably my fault, it was my first time plastidipping so I think I was a little uneven around the edges. It shrunk when it dried so I had little rips around the edges of the tips. I sprayed over em again and sprayed a little more on the inside this time, and all is well. The smell is pretty strong for a while, but it eventually fades. Sorry environment.
FYI I did 6 coats on each tip.
#854
Thanks for the info, that's exactly what I was looking for. This will be my first time using plastic dip and wanted to start with a small project. Depending on the results, I may move forward with a 3" strip across the bottom of the rocker panel.
#855
Member
Lets see those plasti-dip projects
...
#856
Member
Lets see those plasti-dip projects
Originally Posted by OKC_F150
Well I made a change to my grille... on accident!
I took two of the Feniex Apollo lights off my grille and it started to peel the PD. I was going to peel it all off and re-spray the entire thing. Then I got to looking at it, I think it looks good! I still need to touch up the edges. What do y'all think?
(Yeah, I see the bug dings too... damn Oklahoma bugs!)
I took two of the Feniex Apollo lights off my grille and it started to peel the PD. I was going to peel it all off and re-spray the entire thing. Then I got to looking at it, I think it looks good! I still need to touch up the edges. What do y'all think?
(Yeah, I see the bug dings too... damn Oklahoma bugs!)
#857
Senior Member
No problem. Your exhaust tip really shouldn't be that hot after driving, but that being said, dip it when you know you're not going to be driving to let it settle and cure and stuff. I put my new system on like a week and a half after dipping, not on purpose, but that's just when I found the time. I think letting it sit around and cure helped. If I had to guess I'd say a day or maybe even 2 days to let it cure would probably be good enough just to be safe. I think I forgot to mention I waited 30 mins between coats and it worked well - and this was on 2 chrome Borla tips, not sure if it'll be any different if you're spraying the stock pipe or whatever.
#858
Senior Member
PD emblems and badges
I cut the XL tags off my badges and PD'd them. Also I made my grille emblem from a tailgate badge. The tailgate emblem is PD'd with a white and black overlay.
#860
2013 FX4 SuperCrew
iTrader: (1)
Does the Anthracite grey color match Ford wheel lip moldings of an FX4? I'm just wondering what to do with my black PTM bumpers as I hate the chips in the front bumper from winter driving. Thinking if the Anthracite gray matches the molding I could spray the bumpers like those of the Raptors to match. What do you guys think?