Help with an ignition miss
#1
Help with an ignition miss
I'm new to the forum. I have a late 1995 F-150 XLT with the 302 in it. Love the truck! About a year and a half ago it started developing an ignition miss. I have tested every sensor for proper voltage, and all of them are functioning as they should. There is no check engine light on. I have replaced plugs, wires, distributor cap and rotor button, distributor, ignition coil, TPS, fuel filter, all vacuum lines, and many other parts I can't recall off the top of my head. I've run electrical, fuel pressure and vacuum tests, to no avail. The miss only happens at midrange rpms when the engine is under a load; technically when the throttle position sensor is at 2.2 volts, there is a jump in the voltage.
I'm at the end of my experience in figuring this out and wonder if anyone has any experience of this happening and what I need to do in order to fix it.
Thanks!!
I'm at the end of my experience in figuring this out and wonder if anyone has any experience of this happening and what I need to do in order to fix it.
Thanks!!