Factory Camera anytime?
10-18-2014, 10:44 AM
#61
Senior Member
Cut the BU/WH wire. Wire the end to the mirror to the common (C) of a single pole double throw (SPDT) switch. Wire the end from the harness to the normally closed (NC) of the switch. Wire 12 volt positive to the normally open (NO) of the switch.
Here's a different view with SPDT switch inserted. Sure wish I had diagrams like this. Anyone know where they can be obtained?
Here's a different view with SPDT switch inserted. Sure wish I had diagrams like this. Anyone know where they can be obtained?
10-18-2014, 12:23 PM
#62
Senior Member
That diagram is from the factory manual. I bought one. It comes on a CD. It also contains repair procedures and many other physical drawings. Above is from the wiring diagram section. depami is correct in his switch connections. It is a more clever solution. You could use a small rocker or push button switch near the mirror. Perhaps in the area of the dome light and it would minimize the wiring.
10-18-2014, 03:57 PM
#63
That diagram is from the factory manual. I bought one. It comes on a CD. It also contains repair procedures and many other physical drawings. Above is from the wiring diagram section. depami is correct in his switch connections. It is a more clever solution. You could use a small rocker or push button switch near the mirror. Perhaps in the area of the dome light and it would minimize the wiring.
Yep I bought the dvd as well but there is a more dynamic manual online if you pay a fee for a subscription www.motorcraftservice.com and the subscription also allows the user to run his/her own oasis report on any Ford vehicle for access to tsb's, ssm's etc... essentially the same access a dealer tech would use.
.
.
10-18-2014, 04:38 PM
#64
Senior Member
Next dumb question: Where would one buy said CD Manual?
Thanks guys.
10-18-2014, 05:05 PM
#65
The following users liked this post:
depami (10-18-2014)
10-19-2014, 03:51 PM
#67
Senior Member
Thread Starter
Guys, let's keep on topic here. The entire whats legal or not is a mute point. Sean has agreed to stop his interpretation, let's do the same.
10-19-2014, 04:26 PM
#68
He did..I didn't. .how about on topic to OP.. there's been enough constructive information on on to accomplish what you want..since it's Greek to you..find someone who can do the job and stop using my nationally in vein. .I am very offended by my heritage being used in such fashion as you did..good day sir
10-19-2014, 11:29 PM
#69
Senior Member
Thread Starter
He did..I didn't. .how about on topic to OP.. there's been enough constructive information on on to accomplish what you want..since it's Greek to you..find someone who can do the job and stop using my nationally in vein. .I am very offended by my heritage being used in such fashion as you did..good day sir
http://en.m.wikipedia.org/wiki/Greek_to_me
10-19-2014, 11:51 PM
#70
Then blame wikipedia and how the "Greek" word is used. Get over yourself LMMFAO
http://en.m.wikipedia.org/wiki/Greek_to_me
http://en.m.wikipedia.org/wiki/Greek_to_me
Sorry I think I violated forum rules..dunce cap on