How do i break up a glasspack?
#1
kweezy
Thread Starter
How do i break up a glasspack?
A while back i had dual glasspacks put on my truck and i still have one cat. My problem is that the truck is not loud at all and has no real tone, its basically stock sounding but louder. So the question is: how do i go about getting the fiberglass out of the glasspack? (preferably not by taking it off of the truck)
#2
Senior Member
Join Date: Mar 2008
Location: LOUISVILLE
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
my dad has told me that back in his day people who had glasspacks put the water hose down the exhaust pipe and put a little water in and then fire up the cars and it would burn out the fiberglass. i have heard many people do this and they say it works.
Last edited by theville89; 03-28-2008 at 01:49 AM.
#3
that may work. what we used to do was get the glasspack hot then put water on it and in it..whileengine is running .that broke up all the insides and would blow them out...took a couple of times...but worked.
#4
kweezy
Thread Starter
Ive heard both of those, i guess ill try the water on the outside when i get back from a decent length drive. thanks so far but any more imput would be great
#5
i have done this.... get pipes hot... turn truck off and run water in the pipe to fill the glasspack up .. dont take alot of water ... then hit glasspack w/ rubber mallet ... then crank truck back up and watch the water fly out ...might take a couple of time to get it all broken up
gl
gl