Yenrod

I have searched the web and this site and have gotten close, but nothing anywhere. Does anyone have access to these diagrams? Just looking to tap the switched on and I'm betting the black wire is the ground from what I've read that was close to model year and options of mine.
I only seem to have a GN/PUR, BLK, BRN, BLU/WHT, WHT/BLU


ANY direction to said information is GREATLY appreciated! If not, next try is a Haynes/Chilton manual?


Gracias

craiggemt

This help ya?

Yenrod

Thanks for your response. I had found this one, it is not the same as what I have on mine, similar, but has more wires than mine and in different position then where those are shown. I read on some site that the green and purple is the switched 12V and black is grnd, but I either didn't get in contact with the pin or that's not correct info - thus my inquiry. Thanks though!

craiggemt

Pin 4 should be ground and pin 1 should be switched power. That's what I tapped into for my radar detector on my '13. I also only have five wires on the harness.

Slide some needles in those pins and check with a meter.